FordParts
My Garage
My Account
Cart
OEM 2006 Ford Crown Victoria Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Brake Pads found
2006 Ford Crown Victoria Brake Pads, Front Part Number: 3U2Z-2V001-BB
$66.29 MSRP: $99.98You Save: $33.69 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: 3W7Z-2001-BA, 3U2Z-2V001-BA, BRSD-931, 3W1Z-2001-BA, BRF-931
- Item Weight: 6.10 Pounds
- Item Dimensions: 2.6 x 5.5 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3U2Z-2V001-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Brake Pads, Rear Part Number: 4U2Z-2V200-CA
$44.51 MSRP: $66.65You Save: $22.14 (34%)Ships in 1 Business DayProduct Specifications- Other Name: Kit - Brake Shoe And Lining; Disc Brake Pad Set, Rear; Rear Pads
- Position: Rear
- Replaces: 4W1Z-2200-AA, 6W1Z-2200-AA, BRF-1040
- Base No.: 2200
- Item Weight: 3.00 Pounds
- Item Dimensions: 2.6 x 5.5 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-2V200-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Brake Pads, Front Part Number: 4U2Z-2V001-A
$46.59 MSRP: $66.65You Save: $20.06 (31%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Front; Front Pads
- Position: Front
- Replaces: 3W1Z-2001-AA, BR-931-B, 4U2Z-2V001-BA, 6W1Z-2001-A, BRF-931-A, G2MZ-2V001-Z
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.8 x 5.3 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U2Z-2V001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Crown Victoria Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Crown Victoria Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Crown Victoria Brake Pads Parts Q&A
- Q: What Steps Should Be Taken Before Starting Rear Disc Brake Pads Service and Repair on 2006 Ford Crown Victoria?A: Begin the brake pad service and repair on the rear disc brake system only when you turn off electrical power by setting the air suspension service switch to off to stop air spring effects that could shift the vehicle and cause injuries. To access the brake fluid you should check the brake master cylinder reservoir then drain fluid until reaching half the indicated mark. Users need to perform safety protocols on fire suppression systems by depowering them. Place the vehicle securely on a hoisting system but keep it in the neutral gear. Do not attempt to retract the pistons by inserting tools through the caliper sight hole because this will harm the components and refrain from suspending the caliper from the hose to protect the system. You can support the caliper with 25 Nm tension (18 ft. lbs.) using mechanic's wire after installing bolts then reinstalling it. The brake pads should be removed while taking precautions to keep all types of contaminants including grease, oil and brake fluid away from their surfaces. A suitable tool should be used together with a worn brake pad to carefully push caliper pistons back into position without damaging piston or boots. During reinstallation reverse the removal steps while making sure all anti-rattle clips are clean, maintain good condition before checking for proper brake operation. After brake pad maintenance finish the vehicle owner should activate the fire suppression system repower function before turning the air suspension service switch to on if installed.