FordParts
My Garage
My Account
Cart
OEM 2006 Ford Crown Victoria Brake Pedal
Brake Pedal Pad- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Pedals found
2006 Ford Crown Victoria Pedal Assembly Part Number: 5W7Z-2455-AA
Product Specifications- Other Name: Pedal Assembly - Brake
- Manufacturer Note: Fixed foot pedals
- Base No.: 2455
- Item Weight: 5.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W7Z-2455-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Pedal Assembly Part Number: 6W7Z-2455-AA
Product Specifications- Other Name: Pedal Assembly - Brake
- Manufacturer Note: Fixed foot pedals
- Base No.: 2455
- Item Weight: 6.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W7Z-2455-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Crown Victoria Brake Pedal
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Crown Victoria Brake Pedal available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Crown Victoria Brake Pedal as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Crown Victoria Brake Pedal Parts Q&A
- Q: How to service and repair the brake pedal assembly on 2006 Ford Crown Victoria?A: The service and repair of brake pedal assembly needs a battery ground cable disconnect as the first step. First remove the instrument panel close-out panel through the process of removing pushpins followed by turning the lamp counterclockwise. The service begins with removing the speed control deactivator switch and continues with removal of booster push rod retaining pin cover along with the retaining pin. First disconnect the brake pedal pin by removing the stoplight switch and washer followed by bushing and booster push rod. The brake pedal bracket bolt needs removal but must reach 30 Nm (22 ft. lbs.) when reinstalling it. Disengage the adjustable brake pedal drive cable attachment from the brake pedal and stoplight switch harness from the pedal bracket. The pinch bolt that connects the steering column lower yoke to the lower steering column shaft should be removed before discarding it but installing the new bolt with a torque of 28 Nm (21 ft. lbs.). Follow the removal of four brake pedal bracket nuts and detach the brake pedal and bracket before reinstalling them with 28 Nm (21 ft. lbs.) torque. An indexing step should always be performed on the adjustable pedal system whenever repair work takes place on the brake pedal assembly or the accelerator pedal assembly. Position the brake switch so that the closed opening faces the other direction from the brake pedal arm and the open side remains directed toward it. Reverse the removal steps while testing that the stoplights function correctly.