FordParts
My Garage
My Account
Cart
OEM 2006 Ford E-150 Fender
Wheel Fender- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fenders found
2006 Ford E-150 Fender, Front Passenger Side Part Number: 7C2Z-16005-A
$345.12 MSRP: $541.12You Save: $196.00 (37%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Fender Assembly - Front; Fender, Front Right
- Position: Front Passenger Side
- Replaces: 2C2Z-16005-AA, F7UZ-16005-AB
- Base No.: 16005
- Item Weight: 19.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C2Z-16005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford E-150 Fender, Front Driver Side Part Number: 7C2Z-16006-A
$393.56 MSRP: $490.78You Save: $97.22 (20%)Product Specifications- Other Name: Fender Assembly - Front; Fender, Front Left
- Position: Front Driver Side
- Replaces: 2C2Z-16006-AA, F7UZ-16006-AC
- Base No.: 16005
- Item Weight: 18.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C2Z-16006-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford E-150 Fender
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-150 Fender available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-150 Fender as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford E-150 Fender Parts Q&A
- Q: How to service the front fender on 2006 Ford E-150?A: Service of the front fender starts with removing the radiator grille opening panel reinforcement. The splash shield requires removal by first loosening threads from screws situated at the bottom of the front fender. The fender-to-cowl side bracket bolts need removal together with the lower fender bolt and its associated shims when service the lower rear portion of the fender. Reinstall these components with a torque of 11 Nm (8 lb-ft). To begin you must untighten the screws holding the front fender-to-radiator support along with the two front fender-to-front end stone deflector screws then tighten these screws to 11 Nm (8 lb-ft) during installation. To detach the front fender one must start by removing front fender-to-upper apron screws and finally taking off the front fender before reinstalling it by following the removal steps and tightening all screws to 11 Nm (8 lb-ft).