FordParts
My Garage
My Account
Cart
OEM 2006 Ford E-150 Washer Pump
Windshield Washer Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Washer Pumps found
2006 Ford E-150 Water Pump, Front Part Number: E5TZ-17664-B
$20.51 MSRP: $33.09You Save: $12.58 (39%)Product Specifications- Other Name: Motor And Pump Assembly; Windshield Washer Pump, Front; Washer Pump Repair Kit; Washer Pump; Front Washer Pump; Rear Washer Pump; Pump; Windshield Washer Pump
- Position: Front
- Base No.: 17664
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E5TZ-17664-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford E-150 Washer Pump Part Number: 7R3Z-17664-A
$21.27 MSRP: $34.31You Save: $13.04 (39%)Product Specifications- Other Name: Motor And Pump Assembly; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump
- Replaces: 6F1Z-17664-A
- Base No.: 17664
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-17664-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford E-150 Washer Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-150 Washer Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-150 Washer Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford E-150 Washer Pump Parts Q&A
- Q: How to service and repair the windshield washer pump and reservoir on 2006 Ford E-150?A: Service and repair operations for the windshield washer pump and reservoir start with a hood support while the battery along with the tray requires removal of its four bolts until the bolts reach a torque of 28 Nm (21 lb-ft) before reinstallation. You must first obtain the windshield washer fluid in a holding container before disconnecting the washer hose. The washer pump and reservoir removal starts with loosening the nut to 4 Nm (35 lb-in) for installation then moving to the bolt removal at 4 Nm (35 lb-in) tightening upon reinstallation. First disconnect the filler hose and electrical connector before separating the washer pump from the reservoir and the wiring harness locator followed by disconnection of the windshield washer hose. To install the washer pump into the reservoir complete the opposite steps of removal.