How to service the hood latch on 2006 Ford E-150?

The first procedure to service the hood latch involves eliminating both the pin-type retainers along with the radiator sight shield. You must take out the bolts before moving the hood latch to a separate position. You should next remove the screw which disconnectes the release handle and cable followed by hood latch removal. Install the hood latch by following the reversal order of removal while tightening bolts to 12 Nm (9 lb-ft). You should lower the hood to verify proper hood latch alignment as the last step.

OEM 2006 Ford E-150 Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2006 Ford E-150 Lock, Front
Part Number: 6C2Z-16700-AA
Product Specifications
- Other Name: Latch Assembly - Hood; Hood Latch, Front; Hood Latch
- Position: Front
- Replaces: F7UZ-16700-AA
- Base No.: 16700
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.3 x 3.0 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2006 Ford E-150 Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-150 Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-150 Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-150 Hood Latch Parts Questions & Experts Answers

Q: How to service the hood latch on 2006 Ford E-150?
A: The first procedure to service the hood latch involves eliminating both the pin-type retainers along with the radiator sight shield. You must take out the bolts before moving the hood latch to a separate position. You should next remove the screw which disconnectes the release handle and cable followed by hood latch removal. Install the hood latch by following the reversal order of removal while tightening bolts to 12 Nm (9 lb-ft). You should lower the hood to verify proper hood latch alignment as the last step.