OEM 2006 Ford E-150 Transmission Pan

2006 Ford E-150 Transmission Pan Parts Q&A

• Q: How to Service and Repair the Transmission Pan of the 4R70W/4R75W Automatic Transmission on 2006 Ford E-150?

  A: The service and repair process of 4R70W/4R75W automatic transmission fluid pan begins when the vehicle sits in neutral position on a hoist. Begin service by draining the whole fluid then take out all fluid pan bolts before pulling the bolts free. After pulling out the transmission fluid pan together with its gasket you should pull down in an even manner to disconnect the transmission fluid filter and seal. Check for any damage on the fluid pan and gasket and magnet after cleaning them. When replacing the filter ensure you remove the seal from the main control bore of the pan using a small screwdriver while maintaining bore integrity. The transmission filter can be reused when repairing contamination damages unless significant contamination levels exist. Installing new components becomes necessary when repairing due to contamination problems. After placing the pan magnet inside the fluid pan, you may install the gasket that received cleaning and inspection. The gasket can be reused when it remains undamaged. Secure the fluid pan by using bolts and tighten them to 14 Nm (10 ft. lbs.). Begin filling a dry transmission with converter system by starting from 4.7 liters (5 quarts) of new automatic transmission fluid until the proper fluid volume has been reached.