How to service and repair the Body Control Module on 2006 Ford E-250?

In order to service the Body Control Module, remove the battery first. Take off right A-pillar lower trim panel and two nuts which hold the vehicle security module, tightening them to 12 Nm (9 lb-ft) during installation. Disassemble the electrical connectors, reprogram the RKE transmitters when changing the module, and revert the process of removing.

OEM 2006 Ford E-250 Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Body Control Module found

View related parts
2006 Ford E-250 Control Module Part Number: 4C2Z-15604-AB
Product Specifications
- Other Name: Kit - Alarm/Keyless Lock System; Body Control Module
- Manufacturer Note: Service kit contains 4C2T15K602AA, instruction sheet, and operating label, FROM 4/29/04
- Replaces: 4C2Z-15604-AA
- Base No.: 15604
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.3 x 6.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C2Z-15604-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2006 Ford E-250 Body Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Body Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Body Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Body Control Module Parts Q&A

Q: How to service and repair the Body Control Module on 2006 Ford E-250?
A: In order to service the Body Control Module, remove the battery first. Take off right A-pillar lower trim panel and two nuts which hold the vehicle security module, tightening them to 12 Nm (9 lb-ft) during installation. Disassemble the electrical connectors, reprogram the RKE transmitters when changing the module, and revert the process of removing.