How to Service the Camshaft Position Sensor on 2006 Ford E-250?

The camshaft position (CMP) sensor requires disconnection of the battery ground, air cleaner and outlet pipe, and connection of the CMP sensor connector to service. Unmount the securing bolt, inspect and lubricate the O-ring seal, and re-mount the sensor, tighten it to 10 Nm (89 lb-in) then reverse the removal procedure.

OEM 2006 Ford E-250 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2006 Ford E-250 Camshaft Position Sensor Part Number: 1W7Z-6B288-AB
$31.26 MSRP: $49.64
You Save: $18.38 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor; Position Sensor; Camshaft Position Sen
- Replaces: 1W7Z-6B288-AA
- Base No.: 6B288
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6B288-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2006 Ford E-250 Camshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford E-250 Camshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford E-250 Camshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford E-250 Camshaft Position Sensor Parts Q&A

Q: How to Service the Camshaft Position Sensor on 2006 Ford E-250?
A: The camshaft position (CMP) sensor requires disconnection of the battery ground, air cleaner and outlet pipe, and connection of the CMP sensor connector to service. Unmount the securing bolt, inspect and lubricate the O-ring seal, and re-mount the sensor, tighten it to 10 Nm (89 lb-in) then reverse the removal procedure.