How to service the thermostat housing on a 3.0L (4V) engine on 2006 Ford Escape?

Service of the thermostat housing on 3.0L (4V) engines begins by placing the vehicle in neutral then hoisting it to the correct position. You must drain the cooling system before you detach the air cleaner outlet pipe. The service requires complete disconnect of upper radiator hose and lower radiator hose and heater hose from the thermostat housing. Remove the thermostat housing by taking off its two thermostat housing-to-engine clamps while repositioning them. The installation process for the new thermostat housing requires following the reverse order of the removal procedure while performing cooling system fillup and bleeding steps.

OEM 2006 Ford Escape Thermostat Housing

Engine Coolant Thermostat Housing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat Housing found

View related parts
2006 Ford Escape Thermostat Housing, Lower Part Number: 2M2Z-8592-CD
$81.94 MSRP: $123.58
You Save: $41.64 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Connection Water Outlet; Engine Coolant Thermostat Housing, Lower; Thermostat Housing Cover; Connection - Water Outlet; Engine Coolant Thermostat Housing; Water Outlet
- Position: Lower
- Base No.: 8592
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M2Z-8592-CD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 6 Cyl 3.0 L GAS

2006 Ford Escape Thermostat Housing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Escape Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Escape Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Escape Thermostat Housing Parts Q&A

Q: How to service the thermostat housing on a 3.0L (4V) engine on 2006 Ford Escape?
A: Service of the thermostat housing on 3.0L (4V) engines begins by placing the vehicle in neutral then hoisting it to the correct position. You must drain the cooling system before you detach the air cleaner outlet pipe. The service requires complete disconnect of upper radiator hose and lower radiator hose and heater hose from the thermostat housing. Remove the thermostat housing by taking off its two thermostat housing-to-engine clamps while repositioning them. The installation process for the new thermostat housing requires following the reverse order of the removal procedure while performing cooling system fillup and bleeding steps.