FordParts
My Garage
My Account
Cart
OEM 2006 Ford Expedition ABS Sensor
ABS Wheel Speed Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Sensors found
2006 Ford Expedition Speed Sensor, Rear Passenger Side Part Number: 2L1Z-2C204-BB
$40.65 MSRP: $64.55You Save: $23.90 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Speed Sensor; ABS Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Base No.: 2C204
- Item Weight: 0.40 Pounds
- Item Dimensions: 15.6 x 11.0 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L1Z-2C204-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Expedition Speed Sensor, Front Driver Side Part Number: 2L1Z-2C204-CA
$51.96 MSRP: $70.11You Save: $18.15 (26%)Product Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Sensor; Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Replaces: 2L1Z-2C190-AA
- Base No.: 2C204
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.5 x 4.4 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L1Z-2C204-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Expedition ABS Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Expedition ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Expedition ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Expedition ABS Sensor Parts Q&A
- Q: How to service the front ABS sensor on 2006 Ford Expedition?A: Service of the front ABS sensor starts with turning off air suspension toggle when present and hoisting the vehicle at neutral position. Begin by removing the electrical connector of the ABS sensor before removing the harness retainer bolt while detaching the retainers which should be tightened to 12 Nm (9 ft. lbs.) during reinstallation. The brake hose requires protection by mounting the caliper through mechanic's wire to avoid damage since you should remove the two caliper anchor bolts followed by precise placement of caliper components including pads and anchor plate. The best torque value for caliper anchor bolts when reinstalling is 200 Nm (148 ft. lbs.). You should remove the brake disc before removing the front ABS sensor bolt and sensor from the vehicle, whereas you must fasten the sensor bolt to a torque of 18 Nm (13 ft. lbs.) upon completion. Finish the installation by running the opposite sequence of removal steps.