Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Ford Expedition Rear Crossmember

Rear Suspension Crossmember
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rear Crossmember found

  • 2006 Ford Expedition Rear Crossmember - 6L1Z-78101C16-A
    2006 Ford Expedition Rear Crossmember Diagram - 6L1Z-78101C16-A
    View related parts

    2006 Ford Expedition Front Crossmember, Rear Part Number: 6L1Z-78101C16-A

    Product Specifications
    • Other Name: Member - Rear Floor; Rear Crossmember; Floor Crossmember; Member - Rear Floor Cross
    • Position: Rear
    • Base No.: <101C16
    • Item Weight: 12.90 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6L1Z-78101C16-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2006 Ford Expedition Submodels:
    • Eddie Bauer, Funkmaster Flex Edition, King Ranch, Limited, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS

2006 Ford Expedition Rear Crossmember

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Expedition Rear Crossmember available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Expedition Rear Crossmember as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Expedition Rear Crossmember Parts Q&A

  • Q: How to Service the Rear Crossmember on 2006 Ford Expedition?
    A: Start vehicle servicing of the rear cross-member by elevating the vehicle then supporting it in place. Move ahead with skid plate fastener and skid plate removal only when they are applicable. Start the service by taking out the fasteners from the left-hand and right-hand exhaust heat shield that connects to the crossmember and continue by loosening and retightening the two transmission mount nuts to 103 Nm (76 lb-ft). Mark the position of the transmission crossmember on the frame bracket that it will occupy after installation for correct reinstallation position. The four transmission crossmember bolts should be removed together with the crossmember before tightening the bolts to 90 Nm (66 lb-ft) during reinstallation. The installation will end through executing the reverse order of removal steps.

Related 2006 Ford Expedition Parts

Alternate Year Models

+
2007 Ford Expedition Rear Crossmember