Other Name: Motor Assembly - Wiper; Windshield Wiper Linkage; Wiper Motor; Motor & Linkage; Front Motor; Wiper Linkage
Manufacturer Note: Windshield Wiper, Includes Motor And Linkage
Replaces: 6L1Z-17508-BA, 2L1Z-17508-AB
Base No.: 17508A
Item Weight: 7.10 Pounds
Item Dimensions: 10.4 x 9.0 x 38.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 8L1Z-17508-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor; Motor
Manufacturer Note: Service Kit
Replaces: 2L1Z-17508-BA
Base No.: 17508
Item Weight: 4.60 Pounds
Item Dimensions: 5.9 x 6.2 x 15.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 6L1Z-17508-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
2006 Ford Expedition Wiper Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Expedition Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Expedition Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Expedition Wiper Motor Parts Q&A
Q: How to service the rear window wiper motor on 2006 Ford Expedition?
A: Service of the rear window wiper motor starts by taking off the rear wiper pivot arm and dust boot cover. To commence the rear window wiper motor service start by removing its pivot shaft nut and handle then reinstall this component after tightening it to 18 Nm (13 lb-ft). You need to open the liftgate glass then loosen and remove the nuts that secure both the rear window striker together with wiper pivot shaft assembly before tightening these components to 6 Nm (53 lb-in) when reinstalling them. Open the liftgate while you remove the liftgate trim panel. First remove the liftgate window glass latch and disconnect its electrical connector when installing a new rear wiper motor then remove its bolts for installation by tightening them to 8 Nm (71 lb-in). The installation of the rear window wiper motor requires removing its electrical connector and bolts. Tighten all bolts to 11 Nm (8 lb-ft) once reinstallation is complete. During new motor installation you should connect the liftgate window glass latch then secure its bolts at 8 Nm (71 lb-in). A distinctive click will signal that the striker connects to the latch when you should proceed to push the rear window wiper striker and pivot shaft assembly into the wiper motor while aligning the pivot shaft pin with the motor disc opening. Position the rear window wiper motor alignment tool against the motor disc along with striker assembly so it can properly fit with clips fastened securely. The installation of the rear wiper motor requires tightening its bolts to 11 Nm (8 lb-ft) while performing electrical connector reconnection. Use care when closing the liftgate glass and then open the liftgate to install the rear window wiper striker and wiper pivot arm mounting assembly nuts which should be tightened to 6 Nm (53 lb-in). Fasten the liftgate by torquing the rear window wiper pivot shaft nut and handle to 18 Nm (13 lb-ft). Place on the dust boot cover with the rear wiper pivot arm. Conclude by opening the liftgate then taking off the rear window wiper motor aligning tool followed by opening the liftgate glass before putting in the liftgate trim panel and confirming that both liftgate components work correctly.