FordParts
My Garage
My Account
Cart
OEM 2006 Ford Expedition Thermostat Housing
Engine Coolant Thermostat Housing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Thermostat Housing found
2006 Ford Expedition Thermostat Housing, Upper Part Number: 3L3Z-8592-CA
$25.19 MSRP: $36.67You Save: $11.48 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Connection Water Outlet; Engine Coolant Thermostat Housing & Cover.; Water Outlet; Thermostat Connector; Upper Housing; Connection - Water Outlet
- Position: Upper
- Replaces: RH-138, 3L3Z-8592-AA
- Base No.: 8592
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.3 x 2.9 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8592-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Expedition Thermostat Housing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Expedition Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Expedition Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Expedition Thermostat Housing Parts Q&A
- Q: How to service the thermostat housing on 2006 Ford Expedition?A: Service procedures for the thermostat housing should start with engine cooling system drainage. The maneuver to remove the upper radiator hose from the thermostat is necessary when replacing the thermostat housing. First remove the two housing bolts and discard the thermostat before throwing away the O-ring seal. The installation process requires you to adjust bolt tightness to 10 Nm (89 inch lbs.). Perform the reverse procedure to install the housing but follow the package instructions to prepare the sealing surfaces and inspect them for cleanliness before sealing. The completion of this operation requires adding a new O-ring seal.