How to service and repair the ignition coil on 2006 Ford Explorer?

Begin the ignition coil servicing process by disconnecting the battery ground cable and ignoring coil electrical connector before separating the radio suppressor connector. It is vital to mark the spark plug wires so the technician knows which coil terminals they belong to prior to reinstalling them. You should disconnect the six spark plug wires from the ignition coil through tapping the tabs and rotating counterclockwise to extract them upwards. The next step requires the removal of four bolts which maintain the ignition coil position. To install the new ignition coil you should tighten its bolts to 6 Nm (53 lb-in), then apply silicone dielectric compound to boot interiors before carrying out the opposite removal steps.

OEM 2006 Ford Explorer Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2006 Ford Explorer Ignition Coil Part Number: FOTZ-12029-A
$83.87 MSRP: $138.00
You Save: $54.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Manufacturer Note: OHV, SOHC
- Base No.: 12029
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FOTZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2006 Ford Explorer Ignition Coil, Black Part Number: 3L3Z-12029-BA
$49.28 MSRP: $81.09
You Save: $31.81 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Manufacturer Note: With Black Coil Boots
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.4 x 8.0 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-12029-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS

2006 Ford Explorer Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Explorer Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Explorer Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Explorer Ignition Coil Parts Q&A

Q: How to service and repair the ignition coil on 2006 Ford Explorer?
A: Begin the ignition coil servicing process by disconnecting the battery ground cable and ignoring coil electrical connector before separating the radio suppressor connector. It is vital to mark the spark plug wires so the technician knows which coil terminals they belong to prior to reinstalling them. You should disconnect the six spark plug wires from the ignition coil through tapping the tabs and rotating counterclockwise to extract them upwards. The next step requires the removal of four bolts which maintain the ignition coil position. To install the new ignition coil you should tighten its bolts to 6 Nm (53 lb-in), then apply silicone dielectric compound to boot interiors before carrying out the opposite removal steps.