How to Remove and Install an Ignition Lock Cylinder on 2006 Ford F-250 Super Duty?

Beginning the service and repair of the ignition lock cylinder needs a battery disconnect. Use an ignition key to rotate it to RUN position for removing the ignition lock cylinder. A 1/8-inch drift should be used to push through the release pin located in the access hole while using the ignition switch lock cylinder to extract the cylinder. The installation of the new ignition lock cylinder requires following the reverse steps from removal while checking for proper ignition lock cylinder function.

OEM 2006 Ford F-250 Super Duty Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2006 Ford F-250 Super Duty Ignition Lock Cylinder
Part Number: 1L3Z-11582-A
$53.19 MSRP: $87.53
You Save: $34.34 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assembly - Steering And Ignition; Trunk Lock Cylinder; Door Lock Cylinder; Ignition Cylinder; Lock & Cylinder; Lock Cylinder; Switch Assembly; Cylinder & Keys; Warning Switch
- Replaces: 1L3Z-11582-AB
- Base No.: 11582
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.6 x 7.7 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-11582-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2006 Ford F-250 Super Duty Ignition Lock Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty Ignition Lock Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty Ignition Lock Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford F-250 Super Duty Ignition Lock Cylinder Parts Questions & Experts Answers

Q: How to Remove and Install an Ignition Lock Cylinder on 2006 Ford F-250 Super Duty?
A: Beginning the service and repair of the ignition lock cylinder needs a battery disconnect. Use an ignition key to rotate it to RUN position for removing the ignition lock cylinder. A 1/8-inch drift should be used to push through the release pin located in the access hole while using the ignition switch lock cylinder to extract the cylinder. The installation of the new ignition lock cylinder requires following the reverse steps from removal while checking for proper ignition lock cylinder function.