How to service and repair the front shock absorbers on F-250 and F-350 on 2006 Ford F-250 Super Duty?

The left-hand side front shock absorber service is depicted in this repair guide for F-250 and F-350 vehicles although the right-hand side maintenance follows the same procedure. All vehicles utilize gas-pressurized shock absorbers that will automatically extend without help so exercise caution by not heating or applying flames to removal or maintenance. The performance of vital systems depends heavily on suspension fasteners because their failure can cause extensive service expenses. Replace parts only with identical numbers or approved equivalent parts which must never include inferior or pseudo-fake designs. The retention quality depends on using correct torque values throughout reassembly. Agree the shock absorber upper nut and washer from the engine compartment before discarding both parts and the bushing while tightening a new assembly to 40 Nm (30 ft. lbs.). After placing the vehicle in neutral on a hoist position seek to remove and discard the lower nut and washer before tightening the new lower nut to 80 Nm (59 ft. lbs.) torque value. Finish the operation by taking out the old shock absorber and putting in the new one through the reverse installation steps.

OEM 2006 Ford F-250 Super Duty Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2006 Ford F-250 Super Duty Shock Absorber, Front
Part Number: AU2Z-18V124-AU
$68.19 MSRP: $112.20
You Save: $44.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Shock
- Position: Front
- Replaces: 3C3Z-18124-PA, 5C3Z-18124-AA, ASH-327, ASH-23459, ASH-23453, ASH-885, ASH-23451, AU2Z-18V124-AL, AT-559, AT-568, AU2Z-18V124-AS, ASH-222, ASH-23450, F81Z-18124-AH, F81Z-18124-AB, F81Z-18124-AP, F81Z-18124-AG, 5C3Z-18124-CA, 3U2Z-18124-GAA, 6C3Z-18124-AGA, AU2Z-18V124-AT, ASH-23455, ASH-392, ASH-329, AU2Z-18V124-AP, ASH-23452, AU2Z-18V124-AN, F81Z-18124-AK, F81Z-18124-AL, F81Z-18124-AF, ASH-23456, AT-567, AU2Z-18V124-AW, F81Z-18124-AA, 5C3Z-18124-BA, AU2Z-18V124-AM, F81Z-18124-AC
- Base No.: 18V124
- Item Weight: 4.60 Pounds
- Item Dimensions: 4.7 x 3.7 x 27.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-AU
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2006 Ford F-250 Super Duty Shock Absorber, Front
Part Number: AU2Z-18V124-AC
$71.59 MSRP: $120.18
You Save: $48.59 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: 5C3Z-18124-KA, 5C3Z-18124-LA, 6C3Z-18124-PBA, 5C3Z-18124-VA, 5C3Z-18124-NB, ASH-23416, ASH-335, ASH-342, AU2Z-18V124-AG, ASH-960, AU2Z-18V124-Z, AU2Z-18V124-AD, ASH-23410, ASH-746, AU2Z-18V124-W, ASH-23433, ASH-23412, ASH-345, AU2Z-18V124-AF, AU2Z-18V124-Y, 5C3Z-18124-MA, 5C3Z-18124-NA, 5C3Z-18124-PA, 5C3Z-18124-JA, 6C3Z-18124-PHA, 5C3Z-18124-TA, ASH-338, 5C3Z-18124-RA, ASH-23419, AU2Z-18V124-X, ASH-23420, AU2Z-18V124-V, ASH-343, AU2Z-18V124-AH, ASH-332, ASH-336, AU2Z-18V124-AJ, ASH-23421, ASH-339, AU2Z-18V124-AE, AU2Z-18V124-AK, ASH-23411, ASH-340, ASH-23414, ASH-23418, ASH-23417, ASH-959, 5C3Z-18124-FA, ASH-23413, 5C3Z-18124-SA, ASH-337
- Base No.: 18124
- Item Weight: 5.80 Pounds
- Item Dimensions: 27.6 x 3.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2006 Ford F-250 Super Duty Shock Absorber, Rear
Part Number: AU2Z-18V125-S
$68.95 MSRP: $113.45
You Save: $44.50 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: 3C3Z-18125-JE, 3C3Z-18125-JB, 3C3Z-18125-KF, 6C3Z-18125-KHA, ASH-198, ASH-23364, ASH-23360, ASH-23374, ASH-23370, ASH-23373, ASH-962, ASH-673, ASH-672, AU2Z-18V125-F, AU2Z-18V125-H, ASH-23367, ASH-23363, ASH-23375, ASH-308, AU2Z-18V125-L, AU2Z-18V125-R, ASH-23366, ASH-23369, AU2Z-18V125-Q, ASH-23361, ASH-827, ASH-23362, ASH-304, ASH-191, ASH-828, AU2Z-18V125-M, ASH-190, 3C3Z-18125-JC, 3C3Z-18125-KB, 3C3Z-18125-KC, 3C3Z-18125-JD, 3C3Z-18125-KD, 5C3Z-18125-C, 5C3Z-18125-JC, 5C3Z-18125-JB, 3C3Z-18125-KE, 5C3Z-18125-JD, 5C3Z-18125-JA, ASH-310, AU2Z-18V125-C, ASH-747, ASH-961, ASH-196, AU2Z-18V125-P, AU2Z-18V125-N, ASH-193, ASH-306, 6C3Z-18125-KBA, AU2Z-18V125-E, ASH-23365, AU2Z-18V125-G, AU2Z-18V125-K, ASH-195, ASH-197, ASH-23371, AU2Z-18V125-A, ASH-194, ASH-23368, ASH-23372, AU2Z-18V125-D, AU2Z-18V125-J, 5C3Z-18125-A, 5C3Z-18125-B, AU2Z-18V125-B, 3C3Z-18125-JF, 5C3Z-18125-JE
- Base No.: 18V125
- Item Weight: 7.10 Pounds
- Item Dimensions: 27.8 x 3.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V125-S
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2006 Ford F-250 Super Duty Shock Absorber, Rear
Part Number: 7C3Z-18125-LGA
$68.18 MSRP: $112.18
You Save: $44.00 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: 5C3Z-18125-G, 6C3Z-18125-B, 8C3Z-18125-LK, ASH-850, AU2Z-18V125-BG, ASH-23491, AU2Z-18V125-BF, 6C3Z-18125-A, 5C3Z-18125-LE, 7C3Z-18125-MGA, ASH-1021, ASH-851, 8C3Z-18125-MK, ASH-1139, ASH-1140, ASH-23490
- Base No.: 18125
- Item Weight: 6.90 Pounds
- Item Dimensions: 34.6 x 3.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7C3Z-18125-LGA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2006 Ford F-250 Super Duty Shock, Rear
Part Number: AU2Z-18V125-AL
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Suspension Shock Absorber; Shock Absorber
- Position: Rear
- Replaces: 5C3Z-18125-LC, 5C3Z-18125-LD, 5C3Z-18125-LB, 5C3Z-18125-E, 6C3Z-18125-MHA, 5C3Z-18125-LA, AU2Z-18V125-AS, AU2Z-18V125-AP, AU2Z-18V125-AK, AU2Z-18V125-AU, ASH-316, ASH-23429, ASH-23422, ASH-23428, ASH-748, ASH-830, ASH-318, ASH-963, ASH-314, ASH-831, AU2Z-18V125-AM, ASH-23426, ASH-23431, 5C3Z-18125-LF, 5C3Z-18125-D, 5C3Z-18125-F, 6C3Z-18125-MBG, ASH-964, ASH-23425, ASH-23430, ASH-312, AU2Z-18V125-AT, AU2Z-18V125-AR, ASH-23427, AU2Z-18V125-AN
- Base No.: 18V125
- Item Weight: 7.40 Pounds
- Item Dimensions: 27.0 x 3.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V125-AL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
2006 Ford F-250 Super Duty Shock Absorber, Rear
Part Number: BU2Z-18V125-F
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: 5C3Z-18125-CB, 5C3Z-18125-CA, 5C3Z-18125-CH, 6C3Z-18125-CEA, 5C3Z-18125-CC, 5C3Z-18125-CF, ASH-301, ASH-886, AU2Z-18V125-BH, BU2Z-18V125-E, ASH-23492, BU2Z-18V125-C, ASH-322, 5C3Z-18125-CJ, ASH-299, ASH-24414, ASH-24413, ASH-24412, ASH-870, BU2Z-18V125-D, ASH-869
- Base No.: 18125
- Item Weight: 5.40 Pounds
- Item Dimensions: 28.1 x 3.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL

2006 Ford F-250 Super Duty Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford F-250 Super Duty Shock Absorber Parts Questions & Experts Answers

Q: How to service and repair the front shock absorbers on F-250 and F-350 on 2006 Ford F-250 Super Duty?
A: The left-hand side front shock absorber service is depicted in this repair guide for F-250 and F-350 vehicles although the right-hand side maintenance follows the same procedure. All vehicles utilize gas-pressurized shock absorbers that will automatically extend without help so exercise caution by not heating or applying flames to removal or maintenance. The performance of vital systems depends heavily on suspension fasteners because their failure can cause extensive service expenses. Replace parts only with identical numbers or approved equivalent parts which must never include inferior or pseudo-fake designs. The retention quality depends on using correct torque values throughout reassembly. Agree the shock absorber upper nut and washer from the engine compartment before discarding both parts and the bushing while tightening a new assembly to 40 Nm (30 ft. lbs.). After placing the vehicle in neutral on a hoist position seek to remove and discard the lower nut and washer before tightening the new lower nut to 80 Nm (59 ft. lbs.) torque value. Finish the operation by taking out the old shock absorber and putting in the new one through the reverse installation steps.