How to Service and Repair Coil Springs on 2006 Ford Focus?

Start coil spring service by removing the strut assembly together with the spring component. Special care is needed because the spring holds extreme tension thus creating a threat of injury to anyone who mishandles it. The appropriate coil spring compressor tool allows the spring compression process. The holding feature will stop the strut rod from spinning when you remove the nut but throw away the nut. The installation process requires users to tighten the new strut rod nut to 90 Nm (66 ft. lbs.). The service begins by taking off the upper mount then removing the spring upper seat and dust boot before extracting both components and the jounce bumper. The spring must be carefully removed from the spring compressor tool device. Verify proper positioning of the upper mount then fit the spring ends into their seats while marking the lower color code. The jounce bumper needs to get installed with its flat surface exposed to the upper position. Follow the reverse order of disassembly while using the specified torque for assembling all parts properly. It is essential to install new parts with exact matching part numbers as original fasteners because this prevents performance problems while reducing future repair bills.

OEM 2006 Ford Focus Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Coil Springs found

View related parts
2006 Ford Focus Coil Spring, Front Part Number: 3S4Z-5W310-CA
$6.92 MSRP: $9.57
You Save: $2.65 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring Assembly - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 5.30 Pounds
- Item Dimensions: 6.2 x 6.3 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3S4Z-5W310-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Coil Spring, Front Part Number: 5S4Z-5W310-AA
$10.97 MSRP: $15.17
You Save: $4.20 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring Assembly - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 5.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5S4Z-5W310-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Spring, Front Part Number: 6S4Z-5310-D
$11.94 MSRP: $16.52
You Save: $4.58 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Spring Kit Front; Coil Spring Set; Coil Springs
- Manufacturer Note: Spring Code BB
- Position: Front
- Base No.: 5310
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6S4Z-5310-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Spring, Rear Part Number: 5S4Z-5560-HA
Product Specifications
- Other Name: Spring - Rear; Coil Springs
- Position: Rear
- Base No.: 5560
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5S4Z-5560-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ST, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Coil Spring, Rear Part Number: 3S4Z-5B669-DA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs; Spring
- Manufacturer Note: Tape color: Red, "DAR"
- Position: Rear
- Base No.: 5560
- Item Weight: 5.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3S4Z-5B669-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Coil Spring, Rear Part Number: 3S4Z-5560-CA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs
- Position: Rear
- Base No.: 5560
- Item Weight: 4.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3S4Z-5560-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Spring, Front Part Number: 6S4Z-5310-A
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs
- Manufacturer Note: Spring Code AA
- Position: Front
- Base No.: 5310
- Item Weight: 4.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6S4Z-5310-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2006 Ford Focus Coil Springs

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Focus Coil Springs available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Focus Coil Springs as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Focus Coil Springs Parts Q&A

Q: How to Service and Repair Coil Springs on 2006 Ford Focus?
A: Start coil spring service by removing the strut assembly together with the spring component. Special care is needed because the spring holds extreme tension thus creating a threat of injury to anyone who mishandles it. The appropriate coil spring compressor tool allows the spring compression process. The holding feature will stop the strut rod from spinning when you remove the nut but throw away the nut. The installation process requires users to tighten the new strut rod nut to 90 Nm (66 ft. lbs.). The service begins by taking off the upper mount then removing the spring upper seat and dust boot before extracting both components and the jounce bumper. The spring must be carefully removed from the spring compressor tool device. Verify proper positioning of the upper mount then fit the spring ends into their seats while marking the lower color code. The jounce bumper needs to get installed with its flat surface exposed to the upper position. Follow the reverse order of disassembly while using the specified torque for assembling all parts properly. It is essential to install new parts with exact matching part numbers as original fasteners because this prevents performance problems while reducing future repair bills.