How to Service and Repair a Shock Absorber on 3-Door/4-Door on 2006 Ford Focus?

Service of the shock absorber requires 3-Door and 4-Door models to begin by removing their trim panel in order to reach the upper nut of the shock absorber. The holding feature safeguards the shock rod from rotating as you remove the upper nut that should be discarded. The service of the shock absorber requires a mount inspection followed by new upper nut installation where tightening measures reach 18 Nm (13 ft. lbs.). The vehicle requires placement on a hoist system when neutral gear mode is active. Move on to remove the lower bolt together with the shock absorber mechanism after discarding both components. Apply torque of 103 Nm to the new shock absorber lower bolt during its installation. Suspend the vehicle at its curb height before you tighten both the upper nut and lower bolt and finish the installation by performing reverse procedures from removal. It is mandatory to use fresh components bearing the original part number and follow torque specifications to achieve appropriate suspension system joint retention and functioning.

OEM 2006 Ford Focus Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Shock Absorbers found

View related parts
2006 Ford Focus Strut, Front Passenger Side Part Number: 7S4Z-18124-D
$58.98 MSRP: $80.27
You Save: $21.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Right Suspension Strut Assembly; Complete Strut Kit.; Shock Absorber
- Position: Front Passenger Side
- Replaces: 6S4Z-18124-Y
- Base No.: 18124
- Item Weight: 11.50 Pounds
- Item Dimensions: 24.4 x 7.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-18124-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- SE, SES, ZXW | 4 Cyl 2.0 L GAS
View related parts
2006 Ford Focus Strut, Driver Side Part Number: 4S4Z-18124-LB
$39.68 MSRP: $53.99
You Save: $14.31 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Complete Strut Set.; Shock Absorber
- Position: Driver Side
- Base No.: 18124
- Item Weight: 9.30 Pounds
- Item Dimensions: 24.2 x 7.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4S4Z-18124-LB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Shock Absorber, Rear Part Number: 9S4Z-18125-A
$54.26 MSRP: $89.27
You Save: $35.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Rear Suspension Shock Absorber Kit; Strut and Shock Assembly.; Shock Assembly; Shock; Suspension Shock Absorber
- Manufacturer Note: Without Attaching Hardware
- Position: Rear
- Replaces: 2M5Z-18125-BA, 7S4Z-18125-B, 8S4Z-18125-A, AST-156, AST-293, 6S4Z-18125-BA, AST-39, AST-353
- Base No.: 18125
- Item Weight: 4.20 Pounds
- Item Dimensions: 27.0 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9S4Z-18125-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SEL, SES, ST, SVT, ZTS, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Strut, Front Passenger Side Part Number: 7S4Z-18124-H
$84.81 MSRP: $115.41
You Save: $30.60 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Front Right Suspension Strut Assembly; Complete Strut Kit.; Shock Absorber
- Position: Front Passenger Side
- Replaces: 6S4Z-18124-Z, 7S4Z-18124-F, AST-289
- Base No.: 18124
- Item Weight: 11.60 Pounds
- Item Dimensions: 25.1 x 7.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-18124-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ST, ZX4, ZX4 ST, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Shock Absorber, Rear Part Number: 7S4Z-18125-DB
$48.08 MSRP: $78.55
You Save: $30.47 (39%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Manufacturer Note: Attaching Hardware Kit For Shock Absorbers
- Position: Rear
- Replaces: 6S4Z-18125-E
- Base No.: 18125
- Item Weight: 4.60 Pounds
- Item Dimensions: 27.0 x 2.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7S4Z-18125-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Strut, Front Passenger Side Part Number: 5U2Z-18V124-M
$98.69 MSRP: $136.53
You Save: $37.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Kit - Front Suspension Strut
- Position: Front Passenger Side
- Base No.: 18124
- Item Weight: 8.80 Pounds
- Item Dimensions: 20.6 x 8.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-18V124-M
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- ZX3 | 4 Cyl 2.0 L GAS
View related parts
2006 Ford Focus Shock Absorber, Rear Part Number: 6S4Z-18125-F
$42.91 MSRP: $58.40
You Save: $15.49 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Shock Absorber; Rear Suspension Strut and Shock Assembly; Complete Strut Set.; Shock; Suspension Shock Absorber
- Manufacturer Note: Attaching Hardware Kit For Shock Absorbers
- Position: Rear
- Replaces: 3S4Z-18125-CA, 6S4Z-18125-CA
- Base No.: 18125
- Item Weight: 3.60 Pounds
- Item Dimensions: 19.9 x 2.8 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6S4Z-18125-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Strut, Passenger Side Part Number: 3S4Z-18124-CB
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Complete Strut Set.
- Position: Passenger Side
- Base No.: 18124
- Item Weight: 9.60 Pounds
- Item Dimensions: 6.1 x 6.1 x 23.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-18124-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- ZX5 | 4 Cyl 2.0 L GAS
View related parts
2006 Ford Focus Strut, Passenger Side Part Number: 4S4Z-18124-LA
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Complete Strut Set.; Shock Absorber
- Position: Passenger Side
- Base No.: 18124
- Item Weight: 10.00 Pounds
- Item Dimensions: 24.7 x 7.5 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4S4Z-18124-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Strut, Front Driver Side Part Number: 7S4Z-18124-G
Product Specifications
- Other Name: Kit - Shock Absorber; Front Left Suspension Strut Assembly; Complete Strut Set.; Shock Absorber
- Position: Front Driver Side
- Replaces: 7S4Z-18124-C, AST-286, AST-288, 6S4Z-18124-B, 6S4Z-18124-C, 7S4Z-18124-E
- Base No.: 18124
- Item Weight: 11.40 Pounds
- Item Dimensions: 24.9 x 7.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-18124-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- S, SE, SES, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2006 Ford Focus Strut, Front Driver Side Part Number: 3S4Z-18124-CA
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Complete Strut Set.
- Position: Front Driver Side
- Base No.: 18124
- Item Weight: 10.10 Pounds
- Item Dimensions: 6.1 x 6.2 x 23.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-18124-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- ZX5 | 4 Cyl 2.0 L GAS
View related parts
2006 Ford Focus Strut, Front Driver Side Part Number: 5U2Z-18V124-P
Product Specifications
- Other Name: Kit - Front Suspension Strut
- Position: Front Driver Side
- Base No.: 18124
- Item Weight: 8.50 Pounds
- Item Dimensions: 19.9 x 7.9 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-18V124-P
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Focus Submodels:
- ZX3 | 4 Cyl 2.0 L GAS

2006 Ford Focus Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Focus Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Focus Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Focus Shock Absorber Parts Q&A

Q: How to Service and Repair a Shock Absorber on 3-Door/4-Door on 2006 Ford Focus?
A: Service of the shock absorber requires 3-Door and 4-Door models to begin by removing their trim panel in order to reach the upper nut of the shock absorber. The holding feature safeguards the shock rod from rotating as you remove the upper nut that should be discarded. The service of the shock absorber requires a mount inspection followed by new upper nut installation where tightening measures reach 18 Nm (13 ft. lbs.). The vehicle requires placement on a hoist system when neutral gear mode is active. Move on to remove the lower bolt together with the shock absorber mechanism after discarding both components. Apply torque of 103 Nm to the new shock absorber lower bolt during its installation. Suspend the vehicle at its curb height before you tighten both the upper nut and lower bolt and finish the installation by performing reverse procedures from removal. It is mandatory to use fresh components bearing the original part number and follow torque specifications to achieve appropriate suspension system joint retention and functioning.