FordParts
My Garage
My Account
Cart
OEM 2006 Ford Fusion EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 EGR Valves found
2006 Ford Fusion EGR Valve Part Number: 1S7Z-9D475-A
$75.47 MSRP: $124.18You Save: $48.71 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 1S7Z-9D475-AA
- Base No.: 9D475
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.1 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-9D475-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion EGR Valve Part Number: 6E5Z-9D475-BA
Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Base No.: 9D475
- Item Weight: 1.90 Pounds
- Item Dimensions: 5.4 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Fusion EGR Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Fusion EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Fusion EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Fusion EGR Valve Parts Q&A
- Q: How to Service the EGR Valve on 2006 Ford Fusion?A: The exhaust gas recirculation (EGR) valve requires servicing by starting with vehicle hoisting in neutral position and disconnection of the ground cable from the battery. The cooling system needs draining before removing the air cleaner inlet pipe. The EGR valve electrical connector needs disconnection before the clamp releases to extract the upper radiator tube at the coolant outlet. After freeing the clamp you should take the coolant hose off from the EGR valve. The EGR valve requires removal of its two bolts then discarding the gasket material. Firmly torque the new valve to 25 Nm (18 lb-ft) when installing. Excessive force and abrasive tools should never be used for cleaning sealing surfaces since they create leaks by generating scratches and gouges; a plastic scraper must be used instead to eliminate old gasket traces. Workers should clean the surfaces with metal surface prep in cases where gasket residue has not been detected. The mating surface cleaning operations should end with the cooling system fill-up and bleeding process.