FordParts
My Garage
My Account
Cart
OEM 2007 Ford Fusion EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 EGR Valves found
2007 Ford Fusion EGR Valve Part Number: 1S7Z-9D475-A
$75.47 MSRP: $124.18You Save: $48.71 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Replaces: 1S7Z-9D475-AA
- Base No.: 9D475
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.1 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-9D475-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion EGR Valve Part Number: 6E5Z-9D475-BA
Product Specifications- Other Name: Valve - Exhaust Gas Recirculation; Exhaust Gas Recirculation (EGR) Valve; EGR Vacuum Solenoid
- Base No.: 9D475
- Item Weight: 1.90 Pounds
- Item Dimensions: 5.4 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6E5Z-9D475-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Fusion EGR Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Fusion EGR Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Fusion EGR Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Fusion EGR Valve Parts Q&A
- Q: How to Service the EGR Valve on 2007 Ford Fusion?A: Service of the Exhaust Gas Recirculation (EGR) valve starts by severing both the electrical connector and EGR tube fitting from the valve component. The service of the EGR valve requires detaching its two securing bolts along with the replacement of its gasket. The new valve should receive bolt torques set at 25 Nm (18 lb-ft). Metal scrapers along with wire brushes and power abrasive discs should always be avoided for cleaning sealing surfaces as they generate scratches which become leak points; a plastic scraping tool serves well for removing EGR system module gasket residues. The surfaces are suitable for metal surface prep cleanup if there exists no remaining gasket material. Clean the EGR valve properly before installation by tightening it to 40 Nm (30 lb-ft).