How to Service the ABS Control Module on 2006 Ford Ranger?

A service of Electronic Brake Control Module requires first removing the hydraulic control unit (HCU). You should gently take out the four anti-lock brake system (ABS) module bolts following specific order while setting torque at 3 Nm (27 inch lbs.) when reinstalling them. Protect the motor terminals and valve stems because breaking the ABS module away from the HCU exposes them to damage. Dispose of the O-ring seals and the ABS module seal by following removal of the ABS module. The complete inspection should be performed for all components to confirm they are clean from debris and liquid substances and the technician should install new seals from the included kit instead of using worn components to avoid leakage at the HCU-ABS module interfaces. Before placing new seals into the ABS module groove ensure proper cleaning then check that valve flange O-ring seals have no twisting before installation. The procedure ends with a reverse order execution of the removal steps.

OEM 2006 Ford Ranger ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Control Modules found

View related parts
2006 Ford Ranger Control Module
Part Number: 4L5Z-2C286-AA
Product Specifications
- Other Name: Module; ABS Hydraulic Assembly; ABS Control Module; Modulator Valve; ABS Control Unit
- Replaces: 4L5Z-2C215-AA
- Base No.: 2C286
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2C286-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Control Module
Part Number: 4L5Z-2C219-BA
Product Specifications
- Other Name: Kit - Repair; ABS Control Module
- Base No.: 2C219
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2C219-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Control Module
Part Number: 4L5Z-2C219-AA
Product Specifications
- Other Name: Module - ABS Control; ABS Control Module
- Base No.: 2C219
- Item Weight: 1.60 Pounds
- Item Dimensions: 13.4 x 10.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2C219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2006 Ford Ranger ABS Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger ABS Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger ABS Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger ABS Control Module Parts Questions & Experts Answers

Q: How to Service the ABS Control Module on 2006 Ford Ranger?
A: A service of Electronic Brake Control Module requires first removing the hydraulic control unit (HCU). You should gently take out the four anti-lock brake system (ABS) module bolts following specific order while setting torque at 3 Nm (27 inch lbs.) when reinstalling them. Protect the motor terminals and valve stems because breaking the ABS module away from the HCU exposes them to damage. Dispose of the O-ring seals and the ABS module seal by following removal of the ABS module. The complete inspection should be performed for all components to confirm they are clean from debris and liquid substances and the technician should install new seals from the included kit instead of using worn components to avoid leakage at the HCU-ABS module interfaces. Before placing new seals into the ABS module groove ensure proper cleaning then check that valve flange O-ring seals have no twisting before installation. The procedure ends with a reverse order execution of the removal steps.