Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
Edge, FX4, Lariat, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
2006 Ford Ranger Fog Light Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Fog Light Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Fog Light Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Ranger Fog Light Bulb Parts Q&A
Q: How to Service the Fog Light Bulb on 2006 Ford Ranger?
A: To maintain the bulb of the fog lamp, make sure that the headlamp and ignition switches are not turned ON. Put the vehicle on a hoist, unplug the electrical connector and pull out the bulb by the base. Avoid touching the glass. Installation can be done in the same way, but in-reverse and never leave the fog lamps on without a bulb.