Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
Edge, FX4, Lariat, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
Custom, Edge, FX4, GT, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
2006 Ford Ranger Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Ranger Headlight Bulb Parts Q&A
Q: How Should a Headlight Bulb Be Handled and Replaced to Ensure Safety and Performance on 2006 Ford Ranger?
A: The headlamp bulb is very sensitive, and must be held by the base only to prevent breaking. This may interfere with performance, so it should not be removed until you are ready to replace it. Do not use a bulb without headlamps on. Marking the replacement To replace, remove the assembly, turn the retainer counterclockwise, and then do the same when installing.