How to Service and Repair the Motor and Transmission Mount on 2006 Ford Ranger?

First service the vehicle in NEUTRAL position using a hoist while keeping in mind 4x4 models need front driveshaft removal before beginning. Identify and mark the points where the rear driveshaft yoke meets the axle flange for preserving the driveshaft equilibrium before removing its four bolts. Users should detach the rear driveshaft from the flange by applying a pry bar while maintaining hammer-free operation. You should begin by removing the transmission mount nuts followed by raising the transmission whereas you should remove the transmission mount. Finally, place the new transmission mount on the extension housing and fix it with screws while torquing them to reach 90 Nm (66 ft. lbs.). Install the transmission mount into the crossmember and fasten its nuts using the same torque values. The last step involves driving the driveshaft along the marks to check for balance before you put in the rear driveshaft and tighten its bolts to 103 Nm (76 ft. lbs.).

OEM 2006 Ford Ranger Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Motor And Transmission Mounts found

View related parts
2006 Ford Ranger Motor Mount, Passenger Side
Part Number: 1L5Z-6038-AA
$65.52 MSRP: $95.37
You Save: $29.85 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 5.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2006 Ford Ranger Mount Bracket, Driver Side
Part Number: F87Z-6031-FA
$59.45 MSRP: $86.53
You Save: $27.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Motor Mount Bracket; Engine Mount Bracket
- Position: Driver Side
- Replaces: F77Z-6031-DA
- Base No.: 6031
- Item Weight: 3.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-6031-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Support, Driver Side
Part Number: 3L5Z-6031-GA
$54.42 MSRP: $83.60
You Save: $29.18 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount, Left; Motor Mount
- Manufacturer Note: LH, FROM 12/02/02
- Position: Driver Side
- Replaces: 2L5Z-6031-BA
- Base No.: 6031
- Item Weight: 6.60 Pounds
- Item Dimensions: 6.8 x 6.7 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-6031-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2006 Ford Ranger Mount Bracket, Driver Side
Part Number: 1L5Z-6031-CA
$50.88 MSRP: $72.78
You Save: $21.90 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Position: Driver Side
- Base No.: 6031
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-6031-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Support, Passenger Side
Part Number: 3L5Z-6030-GA
$63.23 MSRP: $92.03
You Save: $28.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Mount, Right; Motor Mount
- Manufacturer Note: RH, FROM 12/02/02
- Position: Passenger Side
- Replaces: 2L5Z-6030-BA
- Base No.: 6030
- Item Weight: 8.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-6030-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2006 Ford Ranger Mount Bracket, Driver Side
Part Number: 3L5Z-6031-HA
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Manufacturer Note: LH, coil spring suspension, FROM 12/02/02
- Position: Driver Side
- Base No.: 6031
- Item Weight: 5.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-6031-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
2006 Ford Ranger Motor Mount, Driver Side
Part Number: 4L5Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount; Engine Mount
- Position: Driver Side
- Replaces: 2L5Z-6038-AA, 4L5Z-6038-AA, XL5Z-6038-AA
- Base No.: 6038B
- Item Weight: 4.70 Pounds
- Item Dimensions: 5.3 x 4.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Transmission Mount
Part Number: 7L5Z-6068-FA
$104.20 MSRP: $151.67
You Save: $47.47 (32%)
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 1L5Z-6068-BA, F87Z-6068-FA
- Base No.: 6068
- Item Weight: 3.60 Pounds
- Item Dimensions: 6.8 x 4.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-6068-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Motor Mount, Driver Side
Part Number: 1L5Z-6038-AB
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Base No.: 6038
- Item Weight: 5.70 Pounds
- Item Dimensions: 8.0 x 6.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-6038-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2006 Ford Ranger Mount Bracket, Passenger Side
Part Number: 2L5Z-6030-AB
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Manufacturer Note: RH , bracket, torsion bar suspension, FROM 9/25/01
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 4.00 Pounds
- Item Dimensions: 10.5 x 7.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L5Z-6030-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Ranger Mount Bracket, Driver Side
Part Number: 2L5Z-6031-AA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Manufacturer Note: LH, torsion bar suspension, FROM 9/25/01
- Position: Driver Side
- Replaces: F87Z-6031-AB
- Base No.: 6031
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L5Z-6031-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Ranger Transmission Mount
Part Number: F87Z-6068-KA
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Base No.: 6068
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-6068-KA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Motor Mount, Passenger Side
Part Number: YL5Z-6038-CB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Engine Mount
- Position: Passenger Side
- Replaces: F87Z-6038-BA
- Base No.: 6038
- Item Weight: 3.30 Pounds
- Item Dimensions: 7.2 x 5.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL5Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Motor Mount, Driver Side
Part Number: YL5Z-6038-CA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Manufacturer Note: LH, 4X2 - w/front coil springs
- Position: Driver Side
- Replaces: F87Z-6038-BB
- Base No.: 6038
- Item Weight: 4.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL5Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Mount Bracket, Passenger Side
Part Number: 3L5Z-6030-JA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Motor Mount Bracket; Engine Mount Bracket
- Position: Passenger Side
- Replaces: F5TZ-6030-A
- Base No.: 6030
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-6030-JA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Motor Mount, Passenger Side
Part Number: XL5Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Replaces: 2L5Z-6038-AB
- Base No.: 6038
- Item Weight: 5.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL5Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Transmission Mount
Part Number: 7L5Z-6068-AA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Replaces: 2L5Z-6068-AA
- Base No.: 6068
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Ford Ranger Mount Bracket, Passenger Side
Part Number: 3L5Z-6030-HA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Manufacturer Note: RH, coil spring suspension, FROM 4/28/03
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L5Z-6030-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
2006 Ford Ranger Motor Mount, Driver Side
Part Number: 5L5Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Base No.: 6038B
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.2 x 10.3 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS
View related parts
2006 Ford Ranger Motor Mount, Passenger Side
Part Number: 5L5Z-6038-AB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038A
- Item Weight: 4.90 Pounds
- Item Dimensions: 10.3 x 6.2 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-6038-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Sport, STX, XL, XLT | 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 22 Results

2006 Ford Ranger Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on 2006 Ford Ranger?
A: First service the vehicle in NEUTRAL position using a hoist while keeping in mind 4x4 models need front driveshaft removal before beginning. Identify and mark the points where the rear driveshaft yoke meets the axle flange for preserving the driveshaft equilibrium before removing its four bolts. Users should detach the rear driveshaft from the flange by applying a pry bar while maintaining hammer-free operation. You should begin by removing the transmission mount nuts followed by raising the transmission whereas you should remove the transmission mount. Finally, place the new transmission mount on the extension housing and fix it with screws while torquing them to reach 90 Nm (66 ft. lbs.). Install the transmission mount into the crossmember and fasten its nuts using the same torque values. The last step involves driving the driveshaft along the marks to check for balance before you put in the rear driveshaft and tighten its bolts to 103 Nm (76 ft. lbs.).