How to Service and Repair Pushrods on 2006 Ford Ranger?

The service process for push rods requires cleaning them in appropriate solvent followed by compressed air blowing to clear the oil passage. The ends of the push rods require inspection for nicks and grooves along with surface roughness or unwarranted wear to warrant new push rod insertion. Engine installed push rods should be measured for straightness through either physical rotation with the valve closed or by using a Dial Indicator with Bracketry. The replacement of any push rod becomes necessary when specifications show its bending exceeds specified limits.

OEM 2006 Ford Ranger Pushrod

Valve Push Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Pushrod found

View related parts
2006 Ford Ranger Push Rods
Part Number: F6DZ-6565-AA
$3.87 MSRP: $5.98
You Save: $2.11 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod - Valve Push; Pushrod
- Manufacturer Note: 12V
- Base No.: 6565
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 12
- SKU: F6DZ-6565-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Edge, Splash, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Ranger Pushrod

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Pushrod available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Pushrod as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger Pushrod Parts Questions & Experts Answers

Q: How to Service and Repair Pushrods on 2006 Ford Ranger?
A: The service process for push rods requires cleaning them in appropriate solvent followed by compressed air blowing to clear the oil passage. The ends of the push rods require inspection for nicks and grooves along with surface roughness or unwarranted wear to warrant new push rod insertion. Engine installed push rods should be measured for straightness through either physical rotation with the valve closed or by using a Dial Indicator with Bracketry. The replacement of any push rod becomes necessary when specifications show its bending exceeds specified limits.