OEM 2006 Ford Ranger Turn Signal Switch

2006 Ford Ranger Turn Signal Switch Parts Questions & Experts Answers

• Q: How to service and repair the turn signal switch on 2006 Ford Ranger?

  A: A service or repair of the turn signal switch requires starting with disconnecting the battery ground cable. You must first put the ignition key into the RUN position before using a punch to push the release tab while pulling out the ignition switch lock cylinder. Remove the tilt release lever or handle only when it applies. The installation of the steering column cover begins with removing its three screws together with the upper and lower steering column shrouds. The multi-function switch management requires disconnecting all electrical connectors followed by a two-screw removal of the switch to extract it. Complete the installation by reversing the removal steps and securing screws of the multi-function switch to 3 Nm (27 inch lbs.).