How to service the voltage regulator on 2006 Ford Ranger?

In order to maintain the voltage regulator, firstly discard the generator and screws that hold the voltage regulator. On re-installation, tighten the screws. Then place a wire into the wire insertion hole on the generator brush to ensure the brushes are not lost in the course of the assembly and then remove it prior to starting the vehicle. Undo the undoing process to undertake installation.

OEM 2006 Ford Ranger Voltage Regulator

Adjustable Voltage Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Voltage Regulator found

View related parts
2006 Ford Ranger Voltage Regulator Part Number: F1DZ-10C359-A
Product Specifications
- Other Name: Regulator And Brush; Brush & Holder; Regulator Assembly; Brushes; Regulator; Regulator And Brush Holder Assembly
- Replaces: FODZ-10316-A
- Base No.: 10C359
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F1DZ-10C359-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Ranger Submodels:
- Custom, Edge, FX4, S, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2006 Ford Ranger Voltage Regulator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Ranger Voltage Regulator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Ranger Voltage Regulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Ranger Voltage Regulator Parts Q&A

Q: How to service the voltage regulator on 2006 Ford Ranger?
A: In order to maintain the voltage regulator, firstly discard the generator and screws that hold the voltage regulator. On re-installation, tighten the screws. Then place a wire into the wire insertion hole on the generator brush to ensure the brushes are not lost in the course of the assembly and then remove it prior to starting the vehicle. Undo the undoing process to undertake installation.