How to service and repair the front brake caliper on 2006 Ford Taurus?

Service and repair operations on front brake calipers should start by positioning the vehicle on a hoist with neutral transmission. Only DOT 3 brake fluid should be used for brake maintenance because anything else will lead to lasting brake component destruction and disablement of the system. New and old copper washers require installation during brake fluid handling due to the presence of polyglycol ethers and polyglycols that are potentially harmful materials. Also exercise careful handling of the brake fluid by avoiding direct eye contact and thoroughly washing hands afterward along with seeking prompt medical assistance in case of irritation. Water immediately would be required to wash off brake fluid spills on painted or plastic surfaces. The brake hose bolt can be removed while users discard the old copper washers and insert new ones before securing the bolt at 70 Nm (52 ft. lbs.). The brake caliper bolts must be removed next before installation with a torque of 35 Nm (26 ft. lbs.). The caliper requires an assessment before installation to check for any damage especially when you find boot tear or fluid leaks necessitate the calibration requires a new caliper. Finish setup by following the removal steps backward and perform brake caliper bleeding during the process.

OEM 2006 Ford Taurus Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Calipers found

View related parts
2006 Ford Taurus Caliper Assembly, Rear Driver Side Part Number: 1F1Z-2553-BA
$85.93 MSRP: $114.07
You Save: $28.14 (25%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Caliper; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: LH Less pads, 4 wheel disc
- Position: Rear Driver Side
- Base No.: 2553
- Item Weight: 7.30 Pounds
- Item Dimensions: 5.1 x 7.7 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-2553-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
View related parts
2006 Ford Taurus Caliper, Front Driver Side Part Number: 4F1Z-2B121-AA
$45.79 MSRP: $66.65
You Save: $20.86 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Left; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: LH - with pads & bracket. 1 kit required per vehicle (to be used for R.H. and L.H. calipers), After 4-26-2004
- Position: Front Driver Side
- Replaced by: 1U2Z-2V001-JA
- Base No.: 2B121
- Item Weight: 4.90 Pounds
- Item Dimensions: 6.6 x 3.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2B121-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- SE, SEL | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Caliper Assembly, Rear Passenger Side Part Number: 1F1Z-2552-BA
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: RH Less pads, 4 wheel disc
- Position: Rear Passenger Side
- Replaces: 1F1Z-2552-AA, F8DZ-2552-AA, YF3Z-2552-AA, YF1Z-2552-AA, XF1Z-2552-AA
- Base No.: 2552
- Item Weight: 8.40 Pounds
- Item Dimensions: 14.3 x 14.6 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-2552-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
View related parts
2006 Ford Taurus Caliper, Rear Passenger Side Part Number: 2F1Z-2552-AA
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: RH - With pads, 4 wheel disc
- Position: Rear Passenger Side
- Base No.: 2552
- Item Weight: 7.80 Pounds
- Item Dimensions: 3.6 x 5.5 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-2552-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Caliper, Front Driver Side Part Number: 4F1Z-2B121-BA
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: LH - less pads, includes bracket. 1 kit required per vehicle (to be used for R.H. and L.H. calipers), After 4-26-2004
- Position: Front Driver Side
- Base No.: 2B121
- Item Weight: 11.90 Pounds
- Item Dimensions: 4.9 x 6.9 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2B121-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Caliper, Front Passenger Side Part Number: 4F1Z-2B120-BA
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: RH - less pads, includes bracket. 1 kit required per vehicle (to be used for R.H. and L.H. calipers), After 4-26-2004
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 11.70 Pounds
- Item Dimensions: 8.9 x 4.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2B120-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Caliper, Rear Driver Side Part Number: 2F1Z-2553-AA
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: LH - With pads, 4 wheel disc
- Position: Rear Driver Side
- Base No.: 2553
- Item Weight: 7.30 Pounds
- Item Dimensions: 4.8 x 6.9 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-2553-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Brake Caliper Parts Q&A

Q: How to service and repair the front brake caliper on 2006 Ford Taurus?
A: Service and repair operations on front brake calipers should start by positioning the vehicle on a hoist with neutral transmission. Only DOT 3 brake fluid should be used for brake maintenance because anything else will lead to lasting brake component destruction and disablement of the system. New and old copper washers require installation during brake fluid handling due to the presence of polyglycol ethers and polyglycols that are potentially harmful materials. Also exercise careful handling of the brake fluid by avoiding direct eye contact and thoroughly washing hands afterward along with seeking prompt medical assistance in case of irritation. Water immediately would be required to wash off brake fluid spills on painted or plastic surfaces. The brake hose bolt can be removed while users discard the old copper washers and insert new ones before securing the bolt at 70 Nm (52 ft. lbs.). The brake caliper bolts must be removed next before installation with a torque of 35 Nm (26 ft. lbs.). The caliper requires an assessment before installation to check for any damage especially when you find boot tear or fluid leaks necessitate the calibration requires a new caliper. Finish setup by following the removal steps backward and perform brake caliper bleeding during the process.