How to service and repair the front bumper cover on 2006 Ford Taurus?

You must start the front bumper cover service and repair operation by taking out the headlamp assemblies. Set the vehicle on a hoist that maintains neutral gear position. First remove the 5 pin-type retainers from the chin spoiler then proceed to uninstall the air dam after unscrewing its 7 air dam screws and 3 air dam bolts. Installation demands proper torque of 9 Nm (80 lb-in) on all components. Begin the front bumper cover service by first disassembling the LH and RH front fender splash shields that require removal of 8 screws alongside 2 pin-type retainers. You must detach two front bumper cover bolts that exist on each edge before reinstalling while following a torque value of 5 Nm (44 lb-in). Weld fixings for the radiator grille need removal first, then the front bumper cover's 2 pin-type retainers and 4 bolts should be removed before completing installation by tightening the bolts to 5 Nm (44 lb-in). The bumper cover requires pushing its clip toward the edge of the fender to separate it from its mounting position. Return all tools and complete the installation process in exactly the opposite order used during disassembly.

OEM 2006 Ford Taurus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2006 Ford Taurus Impact Bar, Rear Part Number: YF1Z-17906-AB
$63.01 MSRP: $85.75
You Save: $22.74 (27%)
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear; Bar
- Manufacturer Note: Steel
- Position: Rear
- Replaces: XF1Z-17906-AA
- Base No.: 17906
- Item Weight: 15.20 Pounds
- Item Dimensions: 5.8 x 5.6 x 48.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-17906-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2006 Ford Taurus Impact Bar, Front Part Number: 1F1Z-17757-AA
$88.99 MSRP: $123.11
You Save: $34.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front; Bar
- Position: Front
- Replaces: YF1Z-17757-AB
- Base No.: 17757
- Item Weight: 14.50 Pounds
- Item Dimensions: 53.7 x 5.8 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
2006 Ford Taurus Bumper Cover, Rear Part Number: 4F1Z-17K835-CA
$182.82 MSRP: $282.13
You Save: $99.31 (36%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Base No.: 17K835
- Item Weight: 13.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-17K835-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Bumper Cover, Front Part Number: 4F1Z-17D957-DA
Product Specifications
- Other Name: Bumper - Cover
- Manufacturer Note: Paint to match, No license plate brkt used.
- Position: Front
- Base No.: 17D957
- Item Weight: 14.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-17D957-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Bumper Parts Q&A

Q: How to service and repair the front bumper cover on 2006 Ford Taurus?
A: You must start the front bumper cover service and repair operation by taking out the headlamp assemblies. Set the vehicle on a hoist that maintains neutral gear position. First remove the 5 pin-type retainers from the chin spoiler then proceed to uninstall the air dam after unscrewing its 7 air dam screws and 3 air dam bolts. Installation demands proper torque of 9 Nm (80 lb-in) on all components. Begin the front bumper cover service by first disassembling the LH and RH front fender splash shields that require removal of 8 screws alongside 2 pin-type retainers. You must detach two front bumper cover bolts that exist on each edge before reinstalling while following a torque value of 5 Nm (44 lb-in). Weld fixings for the radiator grille need removal first, then the front bumper cover's 2 pin-type retainers and 4 bolts should be removed before completing installation by tightening the bolts to 5 Nm (44 lb-in). The bumper cover requires pushing its clip toward the edge of the fender to separate it from its mounting position. Return all tools and complete the installation process in exactly the opposite order used during disassembly.