How to service and repair the Sway Bar Link on 2006 Ford Taurus?

Start the sway bar link service process by positioning the vehicle in NEUTRAL mode on a hoist system. Power tools should be strictly avoided from removing and installing nuts since they can lead to damage of sway bar link ball joints or boots. First, loosen the upper nut and use the hex holding feature to stop ball joint rotation before uninstalling the nut. The sway bar link becomes operational after the upper nut removal by disconnecting the link fixture and installing your new connection before tightening it to 90 Nm (66 ft. lbs.). First, discard the lower nut while detaching the sway bar link before taking the link out. During installation, you must tighten the bottom nut up to 80 Nm torque value (59 ft. lbs. torque). Use the hex holding feature with the sway bar link nuts before tightening them by socket wrench to a proper torque. Fitting new sway bar link nuts represents the correct procedure for installation.

OEM 2006 Ford Taurus Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2006 Ford Taurus Stabilizer Link, Front Driver Side
Part Number: 3F1Z-5K483-A
$30.14 MSRP: $41.01
You Save: $10.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Driver Side
- Replaces: MEF-175, 3F1Z-5K483-AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.4 x 3.5 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Taurus Stabilizer Link, Front Passenger Side
Part Number: 3F1Z-5K484-A
$30.97 MSRP: $42.14
You Save: $11.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Passenger Side
- Replaces: MEF-180, 3F1Z-5K484-AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.3 x 3.4 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-5K484-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2006 Ford Taurus Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Taurus Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Taurus Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Taurus Sway Bar Link Parts Questions & Experts Answers

Q: How to service and repair the Sway Bar Link on 2006 Ford Taurus?
A: Start the sway bar link service process by positioning the vehicle in NEUTRAL mode on a hoist system. Power tools should be strictly avoided from removing and installing nuts since they can lead to damage of sway bar link ball joints or boots. First, loosen the upper nut and use the hex holding feature to stop ball joint rotation before uninstalling the nut. The sway bar link becomes operational after the upper nut removal by disconnecting the link fixture and installing your new connection before tightening it to 90 Nm (66 ft. lbs.). First, discard the lower nut while detaching the sway bar link before taking the link out. During installation, you must tighten the bottom nut up to 80 Nm torque value (59 ft. lbs. torque). Use the hex holding feature with the sway bar link nuts before tightening them by socket wrench to a proper torque. Fitting new sway bar link nuts represents the correct procedure for installation.