How to Service and Repair the Sway Bar Link on 2007 Ford Taurus?

Start sway bar link servicing by positioning the vehicle in NEUTRAL and placing it on a hoist while keeping away from using power tools for all nut operations because they could damage the ball joints or boots. Start by loosening the upper nut initially until it becomes loose and use the hex holding mechanism for ball joint stability before removing the nut. Uninstall the upper nut from the sway bar link before disconnecting it and installing a new link by tightening the nut to 90 Nm (66 ft. lbs.). First remove and discard the lower sway bar link nut before disconnecting its link then removing the link altogether. When installing the lower nut users should apply torque to 80 Nm (59 ft. lbs.) while using the hex holding feature to stop ball joint motion. The process should end with new sway bar link nuts along with following the reverse steps of removal followed by torques at specified values to achieve proper part retention.

OEM 2007 Ford Taurus Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2007 Ford Taurus Stabilizer Link, Front Driver Side
Part Number: 3F1Z-5K483-A
$30.14 MSRP: $41.01
You Save: $10.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Driver Side
- Replaces: MEF-175, 3F1Z-5K483-AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.4 x 3.5 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2007 Ford Taurus Stabilizer Link, Front Passenger Side
Part Number: 3F1Z-5K484-A
$30.97 MSRP: $42.14
You Save: $11.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Passenger Side
- Replaces: MEF-180, 3F1Z-5K484-AA
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.3 x 3.4 x 12.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-5K484-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2007 Ford Taurus Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Taurus Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Taurus Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Taurus Sway Bar Link Parts Questions & Experts Answers

Q: How to Service and Repair the Sway Bar Link on 2007 Ford Taurus?
A: Start sway bar link servicing by positioning the vehicle in NEUTRAL and placing it on a hoist while keeping away from using power tools for all nut operations because they could damage the ball joints or boots. Start by loosening the upper nut initially until it becomes loose and use the hex holding mechanism for ball joint stability before removing the nut. Uninstall the upper nut from the sway bar link before disconnecting it and installing a new link by tightening the nut to 90 Nm (66 ft. lbs.). First remove and discard the lower sway bar link nut before disconnecting its link then removing the link altogether. When installing the lower nut users should apply torque to 80 Nm (59 ft. lbs.) while using the hex holding feature to stop ball joint motion. The process should end with new sway bar link nuts along with following the reverse steps of removal followed by torques at specified values to achieve proper part retention.