How to service the rear sway bar link on Ford Taurus?

A service on the rear sway bar link starts with wheel and tire removal prior to installation of new suspension fasteners. The hex holding feature should be used to stop the sway bar link stud from rotating during lower nut removal and subsequent discarding of this nut. The installation of the lower nut requires tightening it to 55 Nm (41 lb-ft). The upper nut requires disposal before installation where you should tighten it to 38 Nm (28 lb-ft). The sway bar link service requires the use of brand-new suspension fasteners during every procedure. The sway bar link protective plastic cover needs to be situated in the forward direction of the vehicle. When reinstalling you should repeat the usage of the hex holding feature to prevent rotation of the stud then perform removal steps in reverse order for installation completion. The sway bar bushing along with the bracket forms part of the sway bar assembly thus requiring vehicle suspension at ride height for correct sway bar and link installation.

How to Service and Repair the Front Sway Bar Link on Ford Taurus?

All sway bar link repair and servicing tasks must begin after placing the vehicle in neutral mode onto a hoist. Using power tools to remove sway bar link nuts will cause damage to ball joints and boots, so they must be avoided when performing this task. Start opening the upper sway bar link nut before applying the tool to hold the ball joints stable for nut removal, then discard the nut. The new upper sway bar nut requires torque to 55 Nm (41 lb-ft) after installation. The procedure must be repeated for the lower nut by replacing the old one with a new one and following the same torque direction. The hex-holding feature should be activated once more to stop ball joints from rotating as you snug the nuts before tightening both nuts with a socket and torque wrench according to the removal process. Using parts of equal part number remains essential because inferior quality substitutes or improper models could create important service problems.

OEM Ford Taurus Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Sway Bar Links found

View related parts
Ford Taurus Stabilizer Link, Front Passenger Side Part Number: 3F1Z-5K484-A
$30.97 MSRP: $42.14
You Save: $11.17 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Passenger Side
- Replaces: MEF-180, 3F1Z-5K484-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Stabilizer Link, Front Passenger Side Part Number: GG1Z-5K484-A
$48.89 MSRP: $77.64
You Save: $28.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Front Right Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front Passenger Side
- Replaces: AA5Z-5K484-A, MEF-161
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Stabilizer Link, Front Driver Side Part Number: GG1Z-5K483-A
$50.28 MSRP: $82.73
You Save: $32.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Sway Bar Link Kit
- Position: Front Driver Side
- Replaces: MEF-162
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Stabilizer Link, Front Driver Side Part Number: 3F1Z-5K483-A
$30.14 MSRP: $41.01
You Save: $10.87 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front Left; Suspension Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Front Driver Side
- Replaces: MEF-175, 3F1Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2007 Ford Taurus | LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Taurus Stabilizer Link, Rear Driver Side Part Number: DG1Z-5K484-B
$55.98 MSRP: $90.31
You Save: $34.33 (39%)
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Left Suspension Stabilizer Bar Link Kit; Sway Bar Link; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear Driver Side
- Replaces: 8A8Z-5K484-D, AA8Z-5K484-B, MEF-115
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Stabilizer Link, Passenger Side Part Number: 2F1Z-5K484-BA
$35.84 MSRP: $56.91
You Save: $21.07 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Passenger Side
- Replaces: 1F1Z-5K484-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | G, GL, LX, SE, SE Comfort, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Stabilizer Link, Driver Side Part Number: 2F1Z-5K483-BA
$42.37 MSRP: $67.27
You Save: $24.90 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link; Link Assembly; Link End
- Position: Driver Side
- Replaces: 1F1Z-5K483-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford Taurus | G, GL, LX, SE, SE Comfort, SHO | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 8 Cyl 3.4 L GAS
View related parts
Ford Taurus Stabilizer Link, Rear Passenger Side Part Number: DG1Z-5K484-A
$55.25 MSRP: $90.91
You Save: $35.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link - Stabilizer Bar; Rear Right Suspension Stabilizer Bar Link Kit; Sway Bar Link.; Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear Passenger Side
- Replaces: AA8Z-5K484-A, 8A8Z-5K484-C, MEF-114
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Taurus | Limited, SE, SEL, SHO | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Stabilizer Link, Front Driver Side Part Number: 7F9Z-5K483-L
$37.29 MSRP: $60.91
You Save: $23.62 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Driver Side
- Replaces: 5F9Z-5K483-AL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Stabilizer Link Part Number: F4DZ-5K484-A
$115.88 MSRP: $194.55
You Save: $78.67 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link Kit; Sway Bar Link
- Manufacturer Note: RH & LH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1986-1995 Ford Taurus | GL, L, LX, MT5, SE, SHO | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS
View related parts
Ford Taurus Stabilizer Link, Rear Part Number: 7F9Z-5K484-S
$31.24 MSRP: $42.51
You Save: $11.27 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: 5F9Z-5K484-AS
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS
View related parts
Ford Taurus Stabilizer Link, Front Passenger Side Part Number: 7F9Z-5K484-R
$38.29 MSRP: $62.55
You Save: $24.26 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link Kit, Front Left/Right.; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front Passenger Side
- Replaces: 5F9Z-5K484-AR
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Taurus | Limited, SE, SEL | 6 Cyl 3.5 L GAS

Ford Taurus Sway Bar Link

OEM Sway Bar Link boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Sway Bar Link with long life and a perfect fit. Come to our website and find genuine Ford Taurus parts. We keep a wide inventory of OEM Taurus parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Sway Bar Link is one of these parts that are rather crucial for the transportation vehicle's stability and performance of the Ford Taurus series. Basically, the Sway Bar Link is an important link between the sway bar and the control arm and serves very important function of reducing body roll during turns thus enhancing the ability of the Ford Taurus to respond to the driver's inputs. Redistributing the weight of the car the Sway Bar Link facilitates smoother motion transfer, it is essential for better fuel consumption and protection. Various Ford Taurus models, from its inception in 1985 to the latest iterations, feature different styles of Sway Bar Links, yet their primary function remains consistent: to adapt general vehicle characteristics; This reliability is well synonymous to the Ford Taurus because it is known for the strong build and design of the car. It also augments the handling besides providing immense satisfaction to the drivers who prefer the Ford Taurus as their ultimate vehicle. Also, the Sway Bar Link is designed with aspects that minimize their usage hence making it stand tall in the market. The applicability of the Sway Bar Link in various models of Ford Taurus proves the company's adherence to safety and performance features that makes every ride as comfortable and safe as possible.

Ford Taurus Sway Bar Link Parts and Q&A

Stabilizer Link, Rear
7F9Z-5K484-S
Q: How to service the rear sway bar link on Ford Taurus?
A:
A service on the rear sway bar link starts with wheel and tire removal prior to installation of new suspension fasteners. The hex holding feature should be used to stop the sway bar link stud from rotating during lower nut removal and subsequent discarding of this nut. The installation of the lower nut requires tightening it to 55 Nm (41 lb-ft). The upper nut requires disposal before installation where you should tighten it to 38 Nm (28 lb-ft). The sway bar link service requires the use of brand-new suspension fasteners during every procedure. The sway bar link protective plastic cover needs to be situated in the forward direction of the vehicle. When reinstalling you should repeat the usage of the hex holding feature to prevent rotation of the stud then perform removal steps in reverse order for installation completion. The Sway Bar Bushing along with the bracket forms part of the sway bar assembly thus requiring vehicle suspension at ride height for correct sway bar and link installation.
Stabilizer Link, Front Driver Side
7F9Z-5K483-L
Q: How to Service and Repair the Front Sway Bar Link on Ford Taurus?
A:
All sway bar link repair and servicing tasks must begin after placing the vehicle in neutral mode onto a hoist. Using power tools to remove sway bar link nuts will cause damage to Ball Joints and boots, so they must be avoided when performing this task. Start opening the upper sway bar link nut before applying the tool to hold the ball joints stable for nut removal, then discard the nut. The new upper sway bar nut requires torque to 55 Nm (41 lb-ft) after installation. The procedure must be repeated for the lower nut by replacing the old one with a new one and following the same torque direction. The hex-holding feature should be activated once more to stop ball joints from rotating as you snug the nuts before tightening both nuts with a socket and torque wrench according to the removal process. Using parts of equal part number remains essential because inferior quality substitutes or improper models could create important service problems.