FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln LS Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Evaporators found
2006 Lincoln LS Evaporator Core Part Number: 6W4Z-19860-A
Product Specifications- Other Name: Core - Air Conditioning Evaporator; A/C Evaporator Core; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator
- Replaces: XW4Z-19860-AA
- Base No.: 19860
- Item Weight: 6.40 Pounds
- Item Dimensions: 12.4 x 10.2 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W4Z-19860-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln LS Housing Assembly Part Number: 6W4Z-19850-AA
Product Specifications- Other Name: Evaporator Assembly; HVAC Unit Case Assembly; Case Assembly
- Replaces: 4W4Z-19850-AA
- Base No.: 19850A
- Item Weight: 15.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W4Z-19850-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln LS Evaporator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln LS Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln LS Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln LS Evaporator Parts Q&A
- Q: How to service and repair the evaporator core on 2006 Lincoln LS?A: Prior to removing the evaporator core start with a vacuum leak test to check for leaks when there is a suspicion. A receiver/drier replacement is required only when changes are detected from a blown A/C compressor or receiver/drier damage exists. Commence by taking off both the heater core and evaporator core housing and proceed with unscrewing two attachments which link the air inlet housing to the evaporator core housing. The air inlet housing separation from the evaporator core housing can proceed by disengaging the clip before disconnecting and setting aside the evaporator core housing wire harness. The evaporator core housing cover can be accessed after removing the dash panel seal combined with the eight screws which maintain the heater core and evaporator core housing cover. Delete the evaporator core and replace it by following the removal order while installing new O-ring seals and adding PAG oil of the proper amount into the refrigerant system.