FordParts
My Garage
My Account
Cart
OEM 2006 Lincoln Navigator A/C Expansion Valve
Air Conditioning Expansion Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 A/C Expansion Valve found
2006 Lincoln Navigator Expansion Valve, Front Part Number: 5L1Z-19849-BA
$46.02 MSRP: $73.07You Save: $27.05 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Valve Assembly - Evaporator Expansion; A/C Expansion Valve, Front; Control Valve; A/C Expansion Valve
- Position: Front
- Base No.: 19849B
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L1Z-19849-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Lincoln Navigator A/C Expansion Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Lincoln Navigator A/C Expansion Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Lincoln Navigator A/C Expansion Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Lincoln Navigator A/C Expansion Valve Parts Q&A
- Q: How to Service and Repair the A/C Expansion Valve on 2006 Lincoln Navigator?A: Start the service and repair process of the A/C expansion valve by recovering all refrigerant first. The powertrain control module together with the bracket needs to be removed first. The fitting bolt of the A/C expansion valve needs to be removed followed by O-ring seal disposal before torquing the new bolt up to 8 Nm (71 lb-in). After removing the two bolts from the A/C expansion valve, proceed by discarding its O-ring seals before installing new seals, which should be tightened to 8 Nm (71 lb-in). The repair process involves reversing the removal steps and replacing the O-ring seals along with PAG oil lubrication of the refrigerant system with sufficient clean PAG oil. End the process by evacuating and leak-testing and then charging the refrigerant system.