FordParts
My Garage
My Account
Cart
OEM 2006 Mercury Mariner Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Starters found
2006 Mercury Mariner Starter Part Number: 9E5Z-11002-A
$289.82 MSRP: $480.00You Save: $190.18 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor
- Replaces: BE5Z-11002-B, SA-1019
- Base No.: 11002
- Item Weight: 9.20 Pounds
- Item Dimensions: 8.0 x 6.1 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9E5Z-11002-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Mariner Starter Part Number: BB5Z-11002-A
Product Specifications- Other Name: Starter Motor Assembly; Starter Motor; Reman Starter Motor
- Replaces: 6S4Z-11002-AA, 5S4Z-11002-A, SA-934
- Base No.: 11002
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.4 x 5.9 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BB5Z-11002-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Mercury Mariner Starter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Mariner Starter available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Mariner Starter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Mercury Mariner Starter Parts Q&A
- Q: How to service and repair the starter motor on 2006 Mercury Mariner?A: Service operations on the starter motor need to begin while the vehicle stays in neutral position on a hoist. Before reattaching the starter solenoid wire nut the mechanic should ensure a tightening torque of 5 Nm (44 lb-in). During service and repair of the starter motor you should first disconnect the starter solenoid battery cable nut and then remove both starter motor solenoid terminal cover and cables while tightening them to 12 Nm (9 lb-ft). Separate the wiring harness retainer before setting the wiring harness to the side. The ground strap nut requires removal but operators should keep the strap put aside while reinstallation requires a torque of 20 Nm (15 lb-ft). First detach the two starter motor stud bolts but tighten the upper and lower bolts by hand before torquing the upper bolt to 35 Nm (26 lb-ft) followed by the lower bolt to 35 Nm (26 lb-ft). Finish the installation job by performing the reverse steps from removal.