How to Service the Mass Air Flow Sensor on 2006 Mercury Mountaineer?

The first step to service the mass air flow (MAF) sensor is disconnecting both the battery ground cable and MAF sensor electrical connector. The MAF security bolts need removal before extracting the sensor from its position. The installation of new or repaired MAF sensors requires bolt tightening at 2 Nm or 18 lb-in before following the opposite order of removal steps for installation.

OEM 2006 Mercury Mountaineer Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2006 Mercury Mountaineer Mass Air Flow Sensor Part Number: 3L3Z-12B579-BA
$138.13 MSRP: $227.27
You Save: $89.14 (40%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Air Charge Temperature Sensor; Intake Air Temperature Sensor; MAF Sensor; Sensor
- Manufacturer Note: 4.6L, Police
- Base No.: 12B579
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.3 x 2.5 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-12B579-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2006 Mercury Mountaineer Mass Air Flow Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Mercury Mountaineer Mass Air Flow Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Mercury Mountaineer Mass Air Flow Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Mercury Mountaineer Mass Air Flow Sensor Parts Q&A

Q: How to Service the Mass Air Flow Sensor on 2006 Mercury Mountaineer?
A: The first step to service the mass air flow (MAF) sensor is disconnecting both the battery ground cable and MAF sensor electrical connector. The MAF security bolts need removal before extracting the sensor from its position. The installation of new or repaired MAF sensors requires bolt tightening at 2 Nm or 18 lb-in before following the opposite order of removal steps for installation.