Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Ford E-150 Brake Booster

Brake Power Booster
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

  • 2007 Ford E-150 Brake Booster - 6C2Z-2005-AAA
    2007 Ford E-150 Brake Booster Diagram - 6C2Z-2005-AAA
    View related parts

    2007 Ford E-150 Brake Booster
    Part Number: 6C2Z-2005-AAA

    Product Specifications
    • Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
    • Replaces: 5C2Z-2005-AA
    • Base No.: 2005
    • Item Weight: 14.30 Pounds
    • Item Dimensions: 20.1 x 12.4 x 12.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6C2Z-2005-AAA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford E-150 Submodels:
    • Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2007 Ford E-150 Brake Booster

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-150 Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-150 Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-150 Brake Booster Parts Questions & Experts Answers

  • Q: How to service the vacuum brake booster on 2007 Ford E-150?
    A: Begin service of the vacuum brake booster when both the engine and brake pedal have been activated multiple times to exhaust brake booster vacuum reserves. Beginning with master cylinder removal you should disconnect the check valve of the brake booster component. The brake booster push rod will disconnect only after removing the cotter pin cover and its corresponding pin. First take away the stoplamp switch and the brake booster push rod bushing before removing the brake booster push rod from the brake pedal pin. Take out the brake booster by unfastening its four nuts and removing the unit from its place. The installation process requires following the opposite steps of removal while tightening brake booster nuts to 25 Nm (18 ft. lbs).

Related 2007 Ford E-150 Parts

Alternate Year Models

+
2006 Ford E-150 Brake Booster 2008 Ford E-150 Brake Booster