How to service and repair the vacuum brake booster on 2008 Ford E-150?

In order to repair the vacuum brake booster you need to remove the brake master cylinder, disconnect the push rod, remove the stoplamp switch and the bushing. Take off the four nuts to take out the booster. Install the new booster, ensure that the nuts are tightened to 25 Nm, and check the brakes to ensure they are working well.

OEM 2008 Ford E-150 Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2008 Ford E-150 Brake Booster Part Number: 8C2Z-2005-C
$173.49 MSRP: $285.45
You Save: $111.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster
- Replaces: 8C2Z-2005-AA, 8C2Z-2005-B
- Base No.: 2005A
- Item Weight: 11.50 Pounds
- Item Dimensions: 13.1 x 11.9 x 13.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C2Z-2005-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2008 Ford E-150 Brake Booster

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-150 Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-150 Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-150 Brake Booster Parts Q&A

Q: How to service and repair the vacuum brake booster on 2008 Ford E-150?
A: In order to repair the vacuum brake booster you need to remove the brake master cylinder, disconnect the push rod, remove the stoplamp switch and the bushing. Take off the four nuts to take out the booster. Install the new booster, ensure that the nuts are tightened to 25 Nm, and check the brakes to ensure they are working well.