How to service and repair the hood latch on 2007 Ford E-150?

The hood latch service and repair procedure starts with removal of both pin-type retainers and radiator sight shield. You should first disconnect the bolts before setting the hood latch to the side. The hood latch release handle and cable can be separated by removing the screw followed by an extraction of the hood latch. Installation requires the opposite order of steps than removal and requires bolt tightening to 12 Nm (9 lb-ft). Examine the hood latch alignment after lowering the hood as the final step.

OEM 2007 Ford E-150 Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2007 Ford E-150 Lock, Front
Part Number: 6C2Z-16700-AA
Product Specifications
- Other Name: Latch Assembly - Hood; Hood Latch, Front; Hood Latch
- Position: Front
- Replaces: F7UZ-16700-AA
- Base No.: 16700
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.3 x 3.0 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C2Z-16700-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2007 Ford E-150 Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-150 Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-150 Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-150 Hood Latch Parts Questions & Experts Answers

Q: How to service and repair the hood latch on 2007 Ford E-150?
A: The hood latch service and repair procedure starts with removal of both pin-type retainers and radiator sight shield. You should first disconnect the bolts before setting the hood latch to the side. The hood latch release handle and cable can be separated by removing the screw followed by an extraction of the hood latch. Installation requires the opposite order of steps than removal and requires bolt tightening to 12 Nm (9 lb-ft). Examine the hood latch alignment after lowering the hood as the final step.