How to Service the Camshaft Position Sensor on 2007 Ford E-250?

In order to service the camshaft position (CMP) sensor, unscrew the electrical connector, remove the securing bolt, air cleaner, and the outlet pipe. Check and replace, where necessary, O-ring seal with clean engine oil. Install the CMP sensor with tightening the bolt at 10 Nm (89 lb in).

OEM 2007 Ford E-250 Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2007 Ford E-250 Camshaft Position Sensor Part Number: 1W7Z-6B288-AB
$31.26 MSRP: $49.64
You Save: $18.38 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; Engine Camshaft Position Sensor; Camshaft Sensor; Position Sensor; Camshaft Position Sen
- Replaces: 1W7Z-6B288-AA
- Base No.: 6B288
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 1.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6B288-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford E-250 Submodels:
- Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2007 Ford E-250 Camshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford E-250 Camshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford E-250 Camshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford E-250 Camshaft Position Sensor Parts Q&A

Q: How to Service the Camshaft Position Sensor on 2007 Ford E-250?
A: In order to service the camshaft position (CMP) sensor, unscrew the electrical connector, remove the securing bolt, air cleaner, and the outlet pipe. Check and replace, where necessary, O-ring seal with clean engine oil. Install the CMP sensor with tightening the bolt at 10 Nm (89 lb in).