FordParts
My Garage
My Account
Cart
OEM 2007 Ford Edge Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Catalytic Converters found
2007 Ford Edge Catalytic Converter, Passenger Side Part Number: 7T4Z-5E212-A
$894.75 MSRP: $1122.86You Save: $228.11 (21%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Converter Assembly; Catalytic Converter, Left, Right
- Manufacturer Note: Rear
- Position: Passenger Side
- Base No.: 5E212A
- Item Weight: 8.40 Pounds
- Item Dimensions: 19.2 x 17.9 x 14.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Catalytic Converter, Front Driver Side Part Number: 7T4Z-5E213-A
$777.00 MSRP: $1050.00You Save: $273.00 (26%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Converter Assembly; Catalytic Converter, Left, Right
- Position: Front Driver Side
- Base No.: 5E212A
- Item Weight: 7.70 Pounds
- Item Dimensions: 17.5 x 14.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E213-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Catalytic Converter, Front Part Number: 7T4Z-5E213-BC
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Right
- Position: Front
- Base No.: 5E212A
- Item Weight: 13.20 Pounds
- Item Dimensions: 17.3 x 14.1 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E213-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Catalytic Converter Part Number: 7T4Z-5E212-BC
Product Specifications- Other Name: Converter Assembly; Catalytic Converter, Left
- Manufacturer Note: Rear
- Base No.: 5E212A
- Item Weight: 12.50 Pounds
- Item Dimensions: 19.4 x 17.7 x 14.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-5E212-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Edge Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Edge Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Edge Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Edge Catalytic Converter Parts Q&A
- Q: How to service the right-hand catalytic converter on all on 2007 Ford Edge?A: The service procedure for the right-hand catalytic converter requires separate attention to the heat shield component when needed. The service process requires using new fasteners and gaskets alongside face cleaning of flanges for effective sealing functionality. Position the vehicle with neutral gear on a hoist frame. Proceed with sensor removal from the catalyst monitor and then remove the exhaust Y-pipe. All-wheel drive vehicles need to begin by discarding the four universal joint flange bolts followed by separating the front driveshaft installation while securing it with mechanic's wire that should be tightened to 70 Nm (52 ft. lbs) during reinstallation. To proceed with the replacement work first extract the right-hand halfshaft assembly along with the two catalytic converter support bracket-to-engine block bolts which need to be tightened to 40 Nm (30 ft. lbs) during the reinstallation step. When working on front-wheel drive vehicles it is necessary to remove the power steering rack shield bolts while torquing them to 15 Nm (11 ft. lbs) for final installation. Combine the reinstallation of the catalytic converter support bracket-to-engine block bolt and nut by tightening them to a torque of 40 Nm (30 ft. lbs). All vehicles require removal of the two nuts and the roll restrictor shield before installation as you should tighten the components to 11 Nm (8 ft. lbs). The roll restrictor bolt needs removal for engine rotation toward the front until it reaches 90 Nm (66 ft. lbs) torque when reinstalling. The two bracket-to-right-hand catalytic converter bolts should be tightened to 20 Nm (15 ft. lbs) during reinstallation. Completing the right-hand catalytic converter replacement requires the removal of four nuts before you discard the parts and new nut installation at 40 Nm (30 ft. lbs). The end of the operation must reverse the removal steps while adding fresh nuts and gasket to the installation.
Related 2007 Ford Edge Parts
2007 Ford Edge Muffler
2007 Ford Edge Vapor Canister
2007 Ford Edge Catalytic Converter Gasket
2007 Ford Edge Exhaust Flange Gasket
2007 Ford Edge Exhaust Hanger
2007 Ford Edge Exhaust Heat Shield
2007 Ford Edge Exhaust Manifold
2007 Ford Edge Exhaust Manifold Gasket
2007 Ford Edge Exhaust Pipe
2007 Ford Edge Muffler Hanger Straps
2007 Ford Edge PCV Hose
2007 Ford Edge Tail Pipe