FordParts
My Garage
My Account
Cart
OEM 2008 Ford Escape Brake Shoe
Brake Shoe Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Shoes found
2008 Ford Escape Parking Brake, Rear Part Number: 5L8Z-2A753-AA
$62.66 MSRP: $85.27You Save: $22.61 (27%)Product Specifications- Other Name: Shoe And Lining Assembly; Parking Brake Shoe, Rear; Brake Shoes; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Base No.: 2648
- Item Weight: 3.30 Pounds
- Item Dimensions: 4.5 x 3.1 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-2A753-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Brake Shoes, Rear Part Number: LU2Z-2V200-J
$44.51 MSRP: $66.65You Save: $22.14 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pad - Brake; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes; Shoes
- Position: Rear
- Replaces: 8L8Z-2200-B, 8L8Z-2200-BD, BRF-936, 8L8Z-2V200-A
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LU2Z-2V200-J
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Escape Brake Shoe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Brake Shoe available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Brake Shoe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Escape Brake Shoe Parts Q&A
- Q: How to Service and Repair rear brake shoes and linings on 2008 Ford Escape?A: The installation of fresh rear brake shoes and linings requires drum resurfacing for glazing elimination and equal friction side-to-side coverage and correction of out-of-round and bell conditions. Brake drum removal should be the first step before proceeding to remove two brake shoe retaining springs along with two pins. The service begins with removing the upper return spring then the self-adjuster and spring assembly before the lower return spring must also come out. The following order consists of removing the trailing brake shoe and parking brake actuator until completion of the leading brake shoe. Before application of silicone grease on the backing plate contact points both parts must receive cleaning treatment and drying process. These adjustments enable smooth installation of the brake drum by putting the self-adjuster into its completely retracted state. Finally, perform the reverse actions of the removal procedure while readjusting the rear brake shoes.