FordParts
My Garage
My Account
Cart
OEM 2007 Ford Expedition Coolant Reservoir
Coolant Tank Reservoir- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Coolant Reservoir found
2007 Ford Expedition Expansion Tank Part Number: AL1Z-8A080-B
$242.80 MSRP: $356.53You Save: $113.73 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Tank Assembly - Radiator Overflow; Air Filter Housing; Coolant Reservoir; Lower Tray
- Replaces: 7L1Z-8A080-A
- Base No.: 8A080
- Item Weight: 8.30 Pounds
- Item Dimensions: 22.2 x 16.4 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL1Z-8A080-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Expedition Coolant Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Expedition Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Expedition Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Expedition Coolant Reservoir Parts Q&A
- Q: How to service and repair the coolant reservoir on 2007 Ford Expedition?A: Safety must be ensured by never unscrewing the coolant pressure relief cap from the hot engine operating cooling system since the system maintains pressure that could generate strong steam and liquid release. Start by opening the cooling system pressure using counterclockwise turns on the pressure relief cap before removing the cap completely. You should use hose clamp pliers to fix the coolant return hose before using a suitable suction device to drain coolant from the degas bottle. First disconnect the inlet coolant hose of the degas bottle from the radiator before removing the air cleaner element. Separate the clip while you disconnect the quick connect coupling of the coolant return hose from the degas bottle. You need to remove two bolts which keep the degas bottle/lower air cleaner housing in place after which you should tighten them down to 15 Nm (11 ft. lbs.) when reinstalling. The degas bottle needs coolant insertion during the conclusion of the process.