FordParts
My Garage
My Account
Cart
OEM 2007 Ford Explorer Sport Trac Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Water Pumps found
2007 Ford Explorer Sport Trac Water Pump Part Number: 3L3Z-8501-CA
$49.93 MSRP: $80.55You Save: $30.62 (39%)Ships in 1 Business DayProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Explorer Sport Trac Water Pump Part Number: 6L2Z-8501-A
$108.18 MSRP: $178.00You Save: $69.82 (40%)Product Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 6L2Z-8501-C
- Base No.: 8501
- Item Weight: 8.10 Pounds
- Item Dimensions: 14.7 x 8.1 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford Explorer Sport Trac Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Explorer Sport Trac Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Explorer Sport Trac Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford Explorer Sport Trac Water Pump Parts Q&A
- Q: How to service and repair the Water Pump on a 4.0L SOHC engine on 2007 Ford Explorer Sport Trac?A: Draining of the engine cooling system must occur before servicing or repairing the coolant pump on a 4.0L SOHC engine. The first step consists of removing cooling fan components and accessory drive belt while the coolant pump pulley bolts should be tightened to 25 Nm (18 ft. lbs.) before reinstalling. The service required for the coolant pump demands hose clamp release on the coolant pump bypass hose along with heater hose and lower radiator hose. After removing the bolts as well as the coolant pump and gasket replace them carefully with a torques value of 10 Nm (89 inch lbs.) for the new gasket. The mating surfaces should be cleaned by applying a plastic scraper and following metal surface prep instructions according to the package directions. Any remnants from the old gasket need removal with a plastic tool instead of using wire brushes, scrapers, or other abrasive tools that could create leaking defects. When complete install the part by returning to the original removal method.