Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Ford Explorer Yaw Sensor

Yaw Rate Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

  • 2007 Ford Explorer Yaw Sensor - 7L1Z-3C187-A
    2007 Ford Explorer Yaw Sensor Diagram - 7L1Z-3C187-A
    View related parts

    2007 Ford Explorer Yaw Rate Sensor Part Number: 7L1Z-3C187-A

    Product Specifications
    • Other Name: Sensor Assembly; Suspension Yaw Sensor; Steering Wheel Speed Sensor; Yaw Sensor; Sensor
    • Manufacturer Note: Lateral/Yaw Sensor
    • Base No.: 3C187
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 6.3 x 2.5 x 2.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7L1Z-3C187-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Explorer Submodels:
    • Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
  • 2007 Ford Explorer Yaw Sensor - 6L2Z-3C187-AA
    2007 Ford Explorer Yaw Sensor Diagram - 6L2Z-3C187-AA
    View related parts

    2007 Ford Explorer Yaw Rate Sensor Part Number: 6L2Z-3C187-AA

    Product Specifications
    • Other Name: Sensor Assembly; Suspension Yaw Sensor; Steering Wheel Speed Sensor; Yaw Sensor; Sensor
    • Manufacturer Note: Lateral/Yaw Sensor
    • Replaces: 3C5Z-3C187-AB
    • Base No.: 3C187
    • Item Weight: 0.70 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6L2Z-3C187-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Explorer Submodels:
    • Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2007 Ford Explorer Yaw Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Explorer Yaw Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Explorer Yaw Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Explorer Yaw Sensor Parts Q&A

  • Q: How to Service the Yaw Sensor on 2007 Ford Explorer?
    A: Service of the yaw rate sensor requires initial step removal of the pin-type retainer and driver side floor console finish panel. Your next step should be to eliminate the two bolts and two nuts that secure the left-hand instrument panel brace while you should tighten the hardware to 9 Nm (80 inch lbs.) before reinstalling. First disconnect the electrical connector of the stability control sensor cluster by removing the two screws from the left-hand heater duct. Remove the electrical harness retainers from the stability control sensor cluster then place them away. You should remove the stability control sensor cluster after taking off its bracket nuts and then install it with tightened nuts at 7 Nm (62 inch lbs.). Conclude the installation by running the removal procedure in reverse order. Software calibration of the anti-lock brake system (ABS) module needs to follow scan tool procedures when installing a new stability control sensor cluster.

Related 2007 Ford Explorer Parts

Alternate Year Models

+
2006 Ford Explorer Yaw Sensor 2008 Ford Explorer Yaw Sensor