FordParts
My Garage
My Account
Cart
OEM 2007 Ford F-150 ABS Sensor
ABS Wheel Speed Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Sensors found
2007 Ford F-150 ABS Sensor, Front Passenger Side Part Number: 7L3Z-2C204-AA
$76.86 MSRP: $126.47You Save: $49.61 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Replaces: 5L3Z-2C204-A
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 2.6 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L3Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-150 ABS Sensor, Front Driver Side Part Number: 7L3Z-2C204-A
$64.24 MSRP: $105.71You Save: $41.47 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Base No.: 2C204
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.1 x 3.1 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7L3Z-2C204-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Ford F-150 ABS Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-150 ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-150 ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Ford F-150 ABS Sensor Parts Q&A
- Q: How to service the ABS Sensor for Front, Rear Wheel Drive (RWD) on 2007 Ford F-150?A: The first task for servicing the ABS sensor for front, rear wheel drive (RWD) requires battery ground cable disconnection. The vehicle requires neutral gear position before setting on a hoist for service operations. Users should disconnect the ABS sensor electrical connector from its harness connector position at the fender apron in the engine compartment. The brake hose retains should be unscrewed to free the ABS sensor harness which can then be taken off from the pushpin retainer. Before reinstalling the ABS sensor ensure to tighten it at 8 Nm (71 inch lbs.). Reverse the procedure of removal to finish the installation.