How to service spark plugs safely and effectively on 2007 Ford F-250 Super Duty?

Your service process for ignition coil-on-plug starts with ignitor coil removal. Safety precautions state that spark plug removal from the engine should only be done when the engine reaches room temperature after its cooling phase since hot or cold temperatures risk threading damage to spark plugs and cylinder heads. Using hand tools operates as the only approved method to remove and install spark plugs thus shielding the spark plug and cylinder head from damage. Before starting the operation use compressed air to blow away foreign objects from the plug well. Residual spark plugs must always return to their original cylinder position when replacing plugs while new spark plugs can be put into any engine cylinder. The proper torque for installing spark plugs after removal stands at 34 Nm (25 lb-ft). The spark plug gap must not be adjusted because an improper gap requires replacement of the spark plug. Revise the process by inspecting the spark plugs for replacement as needed before following the removal procedures for installation.

OEM 2007 Ford F-250 Super Duty Spark Plug

Ignition Spark Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Spark Plugs found

View related parts
2007 Ford F-250 Super Duty Spark Plug Part Number: PZK-1F
$10.25 MSRP: $20.73
You Save: $10.48 (51%)
ADD TO CART
Product Specifications
- Replaced by: PZK-1F-X
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.9 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: PZK-1F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford F-250 Super Duty Spark Plug Part Number: 4C3Z-12A342-A
$19.27 MSRP: $29.82
You Save: $10.55 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Glow Plug; Diesel Glow Plug
- Replaces: 4C3Z-12A342-AA, 4C3Z-12A342-A2, ZD-13-A2, ZD-13
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-12A342-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.0 L DIESEL
View related parts
2007 Ford F-250 Super Duty Spark Plug Part Number: AGSF-22W-MX
$5.33 MSRP: $8.25
You Save: $2.92 (36%)
Product Specifications
- Replaces: AGSF-22W-M, SP-479, AGSF-22W-
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AGSF-22W-MX
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2007 Ford F-250 Super Duty Spark Plug

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-250 Super Duty Spark Plug available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-250 Super Duty Spark Plug as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-250 Super Duty Spark Plug Parts Q&A

Q: How to service spark plugs safely and effectively on 2007 Ford F-250 Super Duty?
A: Your service process for ignition coil-on-plug starts with ignitor coil removal. Safety precautions state that spark plug removal from the engine should only be done when the engine reaches room temperature after its cooling phase since hot or cold temperatures risk threading damage to spark plugs and cylinder heads. Using hand tools operates as the only approved method to remove and install spark plugs thus shielding the spark plug and cylinder head from damage. Before starting the operation use compressed air to blow away foreign objects from the plug well. Residual spark plugs must always return to their original cylinder position when replacing plugs while new spark plugs can be put into any engine cylinder. The proper torque for installing spark plugs after removal stands at 34 Nm (25 lb-ft). The spark plug gap must not be adjusted because an improper gap requires replacement of the spark plug. Revise the process by inspecting the spark plugs for replacement as needed before following the removal procedures for installation.