How to service and repair the Hood Cable on 2007 Ford F-350 Super Duty?

The battery disconnect operation represents the necessary first step for servicing the hood cable. The first step requires users to detach the hood latch and release the two pin-type retainers so they can place the air deflector out of the way to reach the hood cable guide. The technician should start by removing the four hood cable guides before proceeding with the powertrain control module (PCM) and the A-pillar lower trim panel. You should remove the three parking brake control nuts before installation yet tighten them to 25 Nm (18 ft. lbs.). The process starts by moving the parking brake control to one side. After removing the E-clip, the return spring can be released while setting the hood latch release handle aside. Technicians must detach the hood cable from the handle before pulling out the cable together with the dash panel grommet through the vehicle front. The installation process will finish by following the exact reverse steps of removal.

OEM 2007 Ford F-350 Super Duty Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
2007 Ford F-350 Super Duty Release Cable, Front Part Number: 5C3Z-16916-AA
$29.86 MSRP: $43.47
You Save: $13.61 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Control; Hood Release Cable, Front; Hood Release Cable
- Manufacturer Note: Cable Asy
- Position: Front
- Replaces: F81Z-16916-AA
- Base No.: 16916
- Item Weight: 0.50 Pounds
- Item Dimensions: 19.6 x 11.0 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-16916-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2007 Ford F-350 Super Duty Release Handle, Front Part Number: F81Z-16916-AB
$34.80 MSRP: $49.37
You Save: $14.57 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Hood Control; Hood Release Handle, Front; Hood Release Cable, Front; Release Cable; Hood Release Cable
- Position: Front
- Base No.: 16916
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-16916-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL

2007 Ford F-350 Super Duty Hood Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-350 Super Duty Hood Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-350 Super Duty Hood Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-350 Super Duty Hood Cable Parts Q&A

Q: How to service and repair the Hood Cable on 2007 Ford F-350 Super Duty?
A: The battery disconnect operation represents the necessary first step for servicing the hood cable. The first step requires users to detach the hood latch and release the two pin-type retainers so they can place the air deflector out of the way to reach the hood cable guide. The technician should start by removing the four hood cable guides before proceeding with the powertrain control module (PCM) and the A-pillar lower trim panel. You should remove the three parking brake control nuts before installation yet tighten them to 25 Nm (18 ft. lbs.). The process starts by moving the parking brake control to one side. After removing the E-clip, the return spring can be released while setting the hood latch release handle aside. Technicians must detach the hood cable from the handle before pulling out the cable together with the dash panel grommet through the vehicle front. The installation process will finish by following the exact reverse steps of removal.