How to Service and Repair the Transmission Pan on 2007 Ford Focus?

Service and repair of the transmission fluid pan require a hoist with the vehicle in neutral position. Take off the bolts on the pan and unscrew the bead of sealer. Wipe down the surfaces. Installation requires a bead of sealer and tightening of the bolts. Lastly, fill up the transaxle with clean fluid.

OEM 2007 Ford Focus Transmission Pan

Trans Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transmission Pan found

View related parts
2007 Ford Focus Transmission Pan Part Number: XS4Z-7A194-AB
$49.47 MSRP: $70.77
You Save: $21.30 (31%)
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Transmission Oil; Transmission Oil Pan; Automatic Transmission Oil Pan
- Base No.: 7A194
- Item Weight: 3.80 Pounds
- Item Dimensions: 16.3 x 12.8 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS4Z-7A194-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2007 Ford Focus Transmission Pan

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Transmission Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Transmission Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Focus Transmission Pan Parts Q&A

Q: How to Service and Repair the Transmission Pan on 2007 Ford Focus?
A: Service and repair of the transmission fluid pan require a hoist with the vehicle in neutral position. Take off the bolts on the pan and unscrew the bead of sealer. Wipe down the surfaces. Installation requires a bead of sealer and tightening of the bolts. Lastly, fill up the transaxle with clean fluid.