How to Remove and Replace Automatic Transmission Shift Levers on 2007 Ford Focus?

A floor console removal is needed as the first step when handling automatic transmission shift levers replacement. First set the shift lever to PARK position before unclipping the shift lever cable and then removing its outer sleeve. First disconnect the shift lever assembly electrical connector and then uninstall the four nuts to remove the assembly. Thread sealant should be applied to the nuts before tightening them to 9 Nm (80 inch lbs.). Connect the electrical connector to its position before checking that both shift cable locking tabs lock securely and the cable end fits correctly onto the ball stud. Push the shift cable into the bracket until it makes a clicking noise and verify that it stays locked by pulling on the cable. Install the shift cable to the shift lever by putting the transmission in PARK position then adding the outer sleeve followed by the shift lever cable. After installing the floor console you should adjust the shift lever cable if necessary.

OEM 2007 Ford Focus Automatic Transmission Shift Levers

Automatic Transmission Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Shift Levers found

View related parts
2007 Ford Focus Gear Shift Assembly Part Number: 7S4Z-7210-D
$224.73 MSRP: $330.00
You Save: $105.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Housing Assembly - Gear Shift; Automatic Transmission Selector Handle
- Replaces: 7S4Z-7210-B, 7S4Z-7210-C
- Base No.: 7210
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.1 x 14.5 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-7210-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2007 Ford Focus Gear Shift Assembly Part Number: 5S4Z-7210-A
Product Specifications
- Other Name: Lever - Gear Shift
- Base No.: 7K387
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5S4Z-7210-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2007 Ford Focus Gear Shift Assembly Part Number: 7S4Z-7210-A
Product Specifications
- Other Name: Lever - Gear Shift
- Replaces: 5S4Z-7210-B
- Base No.: 7K387
- Item Weight: 4.20 Pounds
- Item Dimensions: 16.5 x 14.7 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-7210-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, S, SE, SES, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2007 Ford Focus Automatic Transmission Shift Levers

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Automatic Transmission Shift Levers available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Automatic Transmission Shift Levers as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Focus Automatic Transmission Shift Levers Parts Q&A

Q: How to Remove and Replace Automatic Transmission Shift Levers on 2007 Ford Focus?
A: A floor console removal is needed as the first step when handling automatic transmission shift levers replacement. First set the shift lever to PARK position before unclipping the shift lever cable and then removing its outer sleeve. First disconnect the shift lever assembly electrical connector and then uninstall the four nuts to remove the assembly. Thread sealant should be applied to the nuts before tightening them to 9 Nm (80 inch lbs.). Connect the electrical connector to its position before checking that both shift cable locking tabs lock securely and the cable end fits correctly onto the ball stud. Push the shift cable into the bracket until it makes a clicking noise and verify that it stays locked by pulling on the cable. Install the shift cable to the shift lever by putting the transmission in PARK position then adding the outer sleeve followed by the shift lever cable. After installing the floor console you should adjust the shift lever cable if necessary.